ACDelco 14593b Drum Brake Shoe
Part Number
14593b
$51.99
In stock
Only 1 left
Free Shipping
Estimated Ship Date: 1 Business Day or Less
ACDelco Silver (Advantage) Bonded Brake Shoes are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These bonded brakes deliver strong braking power while reducing noise and vibration. The chamfer angle and vane configuration follow the OE design. Also no machining is required. ACDelco Silver (Advantage) Bonded Brake Shoes are ready to be installed right out of the box. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Available in riveted and bonded for various vehicle applications
- Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Chevrolet;GMC
- Economical value with dependable quality
- For General Motors vehicles as well as most makes and models
- Non-directional brake surface finish for consistent braking
- Quality validated for proper metallurgy and correct brake plate thickness
- Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
SPECIFICS:
| Drum Inside Diameter (in) | 10 |
| FAQ - Answer 1 | No, but it is a good idea to inspect your brake shoes at each tire rotation. |
| FAQ - Answer 2 | Yes, it is a good idea to inspect your brake fluid often. |
| FAQ - Answer 3 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Question 1 | Do I have to replace my brake shoes after a certain amount of time? |
| FAQ - Question 2 | Do I need to check my brake fluid when replacing other brake parts? |
| FAQ - Question 3 | Do I have to replace all my brake parts when replacing my brake shoes? |
| Friction Material Attachment | Bonded |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 3.8 |
| Length (in) | 9.7 |
| Mounting Hardware Included | No |
| Primary Shoe Friction Material Length (in) | 10 |
| Primary Shoe Friction Material Length (mm) | 254 |
| Programming Required | No |
| Secondary Shoe Friction Material Length (in) | 10 |
| Secondary Shoe Friction Material Length (mm) | 254 |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Squealing or grinding noises. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Low brake pedal height. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake shoe signs of wear include: |
| Weight (lb) | 6.3 |
| Width (in) | 8.8 |
DOWNLOADS:
APPLICATIONS:
- 1992-1992 GMC K1500 - Position: Rear
- w/ 10" Rear Drums
- 1988-1991 Chevrolet K1500 - Position: Rear
- with 10in x 2-1/4in Brakes
- 1992-1992 Chevrolet K1500 - Position: Rear
- w/ 10" Brakes
- 1992-1994 Chevrolet Blazer - Position: Rear
- 1995-1996 Chevrolet Tahoe - Position: Rear
- w/ 10" Rear Brakes
- 1988-1991 GMC C1500 - Position: Rear
- 1992-1996 GMC Yukon - Position: Rear
- w/ 10" Brakes
- 1988-1991 Chevrolet K1500 - Position: Rear
- 1992-1992 GMC C1500 - Position: Rear
- with 10in x 2-1/4in Brakes
- 1988-1991 GMC K1500 - Position: Rear
- with 10in x 2-1/4in Brakes
- 1988-1991 GMC K1500 - Position: Rear
- 1992-1992 Chevrolet C1500 - Position: Rear
- with 10in x 2-1/4in Brakes
- 1988-1991 Chevrolet C1500 - Position: Rear
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine