Part Number
17D655MH
Special Price $52.67 Regular Price $61.96
---------OR---------
In stock
Only 2 left
Estimated Ship Date: 1 Business Day or Less
ACDelco Gold (Professional) Semi-Metallic Disc Brake Pads are a high quality alternative to Original Equipment (OE) parts. These brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering premium braking power. They are a high quality replacement for many vehicles on the road today. Noise-dampening shims are included where applicable. Also, no curing is required. Independently tested using SAE J2784 standards. ACDelco Gold (Professional) Semi-Metallic Brake Pads are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Ceramic, semi-metallic, and organic formulas provide safety and reliability for a range of vehicle applications
- Ford;Ford
- Integrally molded - friction material molded to backing plate for bond integrity
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Stamped backing plate allows for proper pad movement within the caliper assembly, reducing noise, brake pulsation, and helps to protect against premature wear
- Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing for assurance of quality
SPECIFICS:
FAQ - Answer 3 | Do I have to replace all my brake parts when replacing my brake pads? |
FAQ - Answer 4 | Does ACDelco offer other grades of brake pads? |
FAQ - Answer 5 | Do I have to replace my brake pads after a certain amount of time? |
FAQ - Answer 6 | Are these brake parts durable? |
FAQ - Question 4 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
FAQ - Question 5 | Yes, ACDelco also offers GM OE brake pads and Advantage brake pads. |
FAQ - Question 6 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
FAQ - Question 7 | Yes, ACDelco Professional Disc Brake Pads come with a limited lifetime warranty. |
FMSI Number | 7535 |
Friction Material Attachment | Bonded |
Friction Material Composition | Semi-metallic |
Good Maintenance Practices - Section 1 - Bullet 5 | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 1 - Bullet 6 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 7 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 8 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 9 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 2 - Bullet 5 | The following should be conducted by a qualified technician: |
Good Maintenance Practices - Section 2 - Bullet 6 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 7 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 8 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 9 | Parking brake adjustments (as needed). |
Grade Type | Performance |
Height (in) | 4 |
Length (in) | 11.5 |
Mounting Hardware Included | Yes |
Pad Shims Included | Yes |
Pad Wear Sensor Included | No |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 10 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Weight (lb) | 6.6 |
Width (in) | 6.3 |
DOWNLOADS:
APPLICATIONS:
- 1997-1997 Ford F-250 HD - Position: Front
- OE Pad Material is Semi-Metallic Over 8500lb GVW
- 2003-2007 Ford E-250 - Position: Front
- OE Pad Material is Semi-Metallic
- 1995-1997 Ford F-350 - Position: Front
- OE Pad Material is Semi-Metallic
- 2000-2001 Ford E-450 Econoline Super Duty - Position: Front
- Except Mounting Clip Attached to Outboard Front Pad OE Pad Material is Semi-Metallic
- 1995-2002 Ford E-350 Econoline Club Wagon - Position: Front
- OE Pad Material is Semi-Metallic
- 2003-2005 Ford E-350 Club Wagon - Position: Front
- OE Pad Material is Semi-Metallic
- 1995-2002 Ford E-250 Econoline - Position: Front
- OE Pad Material is Semi-Metallic
- 1999-1999 Ford E-450 Econoline Super Duty - Position: Front
- OE Pad Material is Semi-Metallic
- 1999-2007 Ford E-350 Super Duty - Position: Front
- OE Pad Material is Semi-Metallic
- 1997-1997 Ford F-250 - Position: Front
- OE Pad Material is Semi-Metallic Over 8500lb GVW
- 2002-2002 Ford E-450 Econoline Super Duty - Position: Front
- OE Pad Material is Semi-Metallic
- 1995-2000 Ford E-350 Econoline - Position: Front
- OE Pad Material is Semi-Metallic
- 1995-1996 Ford F-250 - Position: Front
- OE Pad Material is Semi-Metallic
- 2003-2007 Ford E-450 Super Duty - Position: Front
- OE Pad Material is Semi-Metallic
- 1996-1999 Ford Econoline Super Duty - Position: Front
- Except Mounting Clip Attached to Outboard Front Pad OE Pad Material is Semi-Metallic
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine