ACDelco Gold (Professional) Non-Coated Disc Brake Rotor and Hub Assemblies are a high quality alternative to Original Equipment (OE) parts. These rotors are mounted to the wheel hub where the calipers can press the brake pads against the brake surface to help stop the vehicle. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

• Cross drilled for quick brake response and heat dissipation
• Black coating on hat and vanes
• Quality validated for proper metallurgy and correct brake plate thickness
• Tighter tolerances similar to GM OE specifications
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

ABS Tone Ring Included:	No
Bearings Included:	No
Bolt Circle Diameter (in):	4.5
Bolt Circle Diameter (mm):	114.3
Bolt Hole Quantity:	5
Center Bore Diameter (in):	2.4in
Center Bore Diameter (mm):	62mm
Center Hole Diameter:	2.441
Center Hole Diameter:	62
Construction:	Full Cast
Conventional Or Drum-In-Hat Type Rotor:	Conventional
Directional or Non-Directional Brake Surface:	No
Disc Finish:	Ground
Discard Thickness:	0.984
Discard Thickness:	25
Grade Type:	Regular
Hat Finish:	Turned
Height (in):	1.9
Height (mm):	49.1
Length (in):	12.3
Material:	Cast Iron
Mounting Bolt Hole Circle Diameter:	114.3
Mounting Bolt Hole Circle Diameter:	4.5
Mounting Bolt Hole Diameter:	0.566
Mounting Bolt Hole Diameter:	14.4
Mounting Bolt Hole Quantity:	5
Nominal Thickness:	1.101
Nominal Thickness:	27.95
Outside Diameter:	11.65
Outside Diameter:	295.9
Overall Height:	1.94
Overall Height:	49.3
Overall Rotor Diameter (mm):	295.91mm
Pad Contact Surface Width:	2.1
Pad Contact Surface Width:	53.25
Programming Required:	No
Rust Resistant Coating:	Yes
Slotted:	No
Solid Or Vented Type Rotor:	Vented
Stud/Lug Hole Quantity:	5
Surface Type:	Smooth
Weight (lb):	16.5
Width (in):	12.3

• 2006-2018 Toyota RAV4 | Position: Front
• 2007-2010 Lexus ES350 | Position: Front
• 2007-2011 Toyota Camry | Position: Front
• 2008-2011 Toyota Avalon | Position: Front
• 2009-2010 Pontiac Vibe | Position: Front
• 2009-2013 Toyota Matrix | Position: Front
• 2011-2016 Scion tC | Position: Front
• 2016 Scion iM | Position: Front
• 2016-2020 Toyota Mirai | Position: Front
• 2017-2018 Toyota Corolla iM | Position: Front