ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box.

• Inspected for balance; resulting in smooth brake operation and noise reduction
• Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
• Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration

ABS Tone Ring Included:	No
Bolt Circle Diameter (in):	4.25
Bolt Circle Diameter (mm):	108
Bolt Hole Quantity:	5
Brake Surface Finish:	Turned
Center Bore Diameter (in):	2.54in
Center Bore Diameter (mm):	64.5mm
Depth:	2.18
Depth:	55.35
Discard Thickness (in):	8.92
Discard Thickness (mm):	226.5
Grade Type:	Regular
Height (in):	5.12
Length (in):	8.92
Material:	Cast Iron
Maximum Brake Diameter (Discard):	226.57
Mount Hole Diameter (in):	0.593in
Mount Hole Diameter (mm):	15.062mm
Nominal Drum Diameter:	0.351
Nominal Drum Diameter:	8.9
Outer Cooling Fins:	Yes
Outside Diameter:	0.414
Outside Diameter:	10.5
Programming Required:	No
Stud/Lug Hole Diameter:	0.573
Stud/Lug Hole Diameter:	14.55
Stud/Lug Hole Quantity:	5
Weight:	12.5
Width (in):	10.88

• 2001-2007 Ford Taurus | Position: Rear
• 2001-2005 Mercury Sable | Position: Rear