Part Number
18FR626
Special Price $84.30 Regular Price $100.38
---------OR---------
In stock
Only 2 left
Estimated Ship Date: 1 Business Day or Less
Description
ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them.
Features
- Pressure tested to ensure safe and confident braking
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Developed without attached brake pads for customization
Specifications
| Abutment Clips Included: | No |
| Anti-Rattle Spring Included: | Yes |
| Bleeder Thread Diameter: | M10x1.5 |
| Caliper Casting Material: | Cast Iron |
| Caliper Color: | Natural |
| Caliper Piston Quantity: | 1 |
| Caliper Slides Included: | Yes |
| Caliper Type: | Floating |
| Casting Material: | Cast Iron |
| Finish: | Plain |
| Grade Type: | Performance |
| Height (in): | 6.7 |
| Inlet Fitting Type: | Female |
| Inlet Thread Diameter: | 0.394 |
| Inlet Thread Diameter: | 10 |
| Length (in): | 9.5 |
| Mounting Bracket Included: | No |
| Mounting Hardware Included: | Yes |
| Pad Wear Sensor Included: | No |
| Pads Included: | No |
| Piston 1 Diameter (in): | 2.5 |
| Piston 1 Diameter (mm): | 63.5 |
| Piston Quantity: | 1 |
| Programming Required: | No |
| Weight (lb): | 12.13 |
| Width (in): | 6.7 |
Fitment
- 1978-1981 Buick Century | Position: Front Left
- 1978-1987 Buick Regal | Position: Front Left
- 1978-1987 Chevrolet El Camino | Position: Front Left
- 1978-1983 Chevrolet Malibu | Position: Front Left
- 1978-1988 Chevrolet Monte Carlo | Position: Front Left
- 1978-1987 GMC Caballero | Position: Front Left
- 1978-1981 Oldsmobile Cutlass | Position: Front Left
- 1978-1984 Oldsmobile Cutlass Calais | Position: Front Left
- 1978-1980 Oldsmobile Cutlass Salon | Position: Front Left
- 1978-1988 Oldsmobile Cutlass Supreme | Position: Front Left
- 1978-1980 Pontiac Grand Am | Position: Front Left
- 1978-1981 Pontiac Grand LeMans | Position: Front Left
- 1978-1987 Pontiac Grand Prix | Position: Front Left
- 1978-1981 Pontiac LeMans | Position: Front Left
- 1983 Pontiac Grand LeMans | Position: Front Left
- 1980-1983 Oldsmobile Cutlass Cruiser | Position: Front Left
- 1985-1987 Oldsmobile Cutlass | Position: Front Left
- 1982-1992 Chevrolet Camaro | Position: Front Left
- 1982-2003 Chevrolet S10 | Position: Front Left
- 1982-1990 GMC S15 | Position: Front Left
- 1985-1987 Oldsmobile Cutlass Salon | Position: Front Left
- 1982-1986 Pontiac Bonneville | Position: Front Left
- 1982-1992 Pontiac Firebird | Position: Front Left
- 1982 Pontiac Parisienne | Position: Front Left
- 1983-1994 Chevrolet S10 Blazer | Position: Front Left
- 1983-1991 GMC S15 Jimmy | Position: Front Left
- 1987-1995 Chevrolet LLV | Position: Front Left
- 1991-2003 GMC Sonoma | Position: Front Left
- 1992-1997 GMC Jimmy | Position: Front Left
- 1995-1997 Chevrolet Blazer | Position: Front Left
- 1996-2000 Isuzu Hombre | Position: Front Left
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine


