Part Number
18FR652
Special Price $77.75 Regular Price $91.47
---------OR---------
In stock
Only 3 left
Estimated Ship Date: 1 Business Day or Less
ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them a high quality replacement for many vehicles on the road today. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These friction ready disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Chevrolet;Chevrolet;Dodge;Freightliner;GMC;GMC;International;Isuzu;Workhorse
- Developed without attached brake pads for customization
- Pressure tested to ensure safe and confident braking
SPECIFICS:
Bleeder Thread Diameter | M10x1.5 |
Caliper Color | Natural |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Material | Cast Iron |
FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
FAQ - Answer 2 | Yes, ACDelco also offers GM OE disc brake calipers. |
FAQ - Answer 3 | No, but it is a good idea to inspect them at every tire rotation. |
FAQ - Question 1 | Do I have to replace all my brake parts when replacing my disc brake calipers? |
FAQ - Question 2 | Does ACDelco offer other grades of disc brake calipers? |
FAQ - Question 3 | Do I have to replace my disc brake calipers after a certain amount of time? |
Finish | Plain |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Grade Type | Performance |
Height (in) | 6.78 |
Inlet Fitting Type | Female |
Length (in) | 9.56 |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Pad Wear Sensor Included | No |
Pads Included | No |
Piston 1 Diameter (in) | 3.4 |
Piston 1 Diameter (mm) | 86.4 |
Piston Quantity | 1 |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Weight (lb) | 17 |
Width (in) | 7.12 |
DOWNLOADS:
APPLICATIONS:
- 1996-1999 Isuzu FSR - Position: Front
- 1983-1983 International S1724 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1997-1997 International 3000FE - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1996-1997 International 3400 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1987 Chevrolet C70 - Position: Rear Left
- 1989-1989 Chevrolet C70 - Position: Rear Left
- 1991-1997 International 4700LP - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1986 GMC P3500 - Position: Front Left
- 1987-1988 Chevrolet P30 - Position: Front Left
- Sliding Caliper
- 1984-1984 Chevrolet G30 - Position: Front Left
- 13" X 3.5" Brake Shoe
- 1978-1986 Chevrolet K30 - Position: Front Left
- w/ Dual Rear Wheels
- 1990-1990 Chevrolet C5500 Kodiak - Position: Front Left
- 1983-1983 GMC C6000 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1986 GMC P3500 - Position: Rear Left
- Sliding Caliper
- 1983-1983 International S1723 - Position: Front Left
- 1984-1984 International S1724 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 2001-2001 Isuzu FSR - Position: Front
- 1995-2002 Chevrolet C3500HD - Position: Rear Left
- 1989-1989 Chevrolet P30 - Position: Front Left
- 1986-1989 GMC C6000 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1988 International M1600 Metro II - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1997-2005 Freightliner MT35 - Position: Front Left
- Single Piston Bendix Caliper w/ M10 x 1.5 Caliper Inlet
- 1979-1983 Chevrolet P30 - Position: Rear Left
- Sliding Caliper
- 1990-1993 Dodge W350 - Position: Front Left
- w/ 10mm Brake Hose Inlet 4500 lb. Axle w/ Casting # 2238451 or 2238452
- 1984-1984 International 1724 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1985 Chevrolet C60 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1986 Chevrolet C70 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1995-2002 Chevrolet C3500HD - Position: Front Left
- Single Piston Caliper
- 1990-1990 GMC C5000 Topkick - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1993-1994 GMC P3500 - Position: Rear Left
- Sliding Caliper
- 1988-1988 Chevrolet R30 - Position: Front Left
- 13" X 2.5" Brake Shoe w/ 13" X 3 1/2" Brakes
- 1991-1993 Chevrolet C3500HD - Position: Front Left
- 1997-1999 GMC P3500 - Position: Front Left
- 1983-1989 International 1854 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1994-1994 Chevrolet C3500HD - Position: Front Left
- To VIN # RJ107932
- 1986-1998 International 1652SC - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1995 International 4600 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1985-1985 International 1754 - Position: Rear Left
- 1985-1986 Chevrolet P30 - Position: Front Left
- 1993-1994 GMC P3500 - Position: Front Left
- 1989-1990 Chevrolet C50 - Position: Front Left
- 1985-1985 International S1753 - Position: Rear Left
- 1989-1990 Chevrolet C50 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1988 Chevrolet P30 - Position: Rear Left
- 1990-1990 GMC C5000 - Position: Front Left
- 1979-1996 GMC G3500 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 2002-2002 Isuzu FSR - Position: Front
- w/ 2.88" Dual Piston Bendix Caliper
- 1980-1982 International S1624 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1991-1993 GMC C3500HD - Position: Rear Left
- 1988-1988 GMC C5000 - Position: Front Left
- 1988-1988 Chevrolet C50 - Position: Rear Left
- 1991-1993 GMC C3500HD - Position: Front Left
- 1983-1983 International 1754 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1991 GMC P3500 - Position: Front Left
- 1991-1994 International 3900FC - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1990 GMC C5000 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1985-1985 Chevrolet G30 - Position: Front Left
- 13" X 2.5" Brake Shoe w/ 13" X 3 1/2" Brakes
- 2000-2003 Workhorse P30 - Position: Front Left
- 13" X 3-1/2" Drum Or Single Piston Rear Disc Stripped Chassis 3.38" Single Piston Bendix Front Caliper
- 1979-1986 GMC C3500 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 1991-1993 Chevrolet P30 - Position: Front Left
- 1984-1984 International 1754 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1989-1989 GMC C5000 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1984 International 1754 - Position: Front Left
- 1992-1992 GMC P3500 - Position: Front Left
- Sliding Caliper
- 1983-1983 International S1724 - Position: Front Left
- 1994-1994 Chevrolet P30 - Position: Rear Left
- 1984-1985 GMC C6000 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1996-1996 GMC Savana 3500 - Position: Front Left
- w/ 13" x 3.5" Brakes Single Rear Wheels
- 1984-1985 Chevrolet C60 - Position: Rear Left
- 1984-1984 Chevrolet P30 - Position: Front Left
- Sliding Caliper
- 1983-1983 Chevrolet C60 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1986 GMC C7000 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1988-1988 Chevrolet C50 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1989 GMC P3500 - Position: Rear Left
- 1983-1986 GMC C7000 - Position: Rear Left
- 1991-1993 Chevrolet C3500HD - Position: Rear Left
- 1995-1996 GMC P3500 - Position: Front Left
- Sliding Caliper
- 1983-1983 International 1724 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1990 GMC P4500 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1979-1986 GMC K3500 - Position: Front Left
- w/ Dual Rear Wheels
- 1986-1986 Chevrolet G30 - Position: Front Left
- 13" X 3.5" Brake Shoe
- 1985-1989 International S1753 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1995 International 7100 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1997-2005 Freightliner MT35 - Position: Rear Left
- 1979-1983 GMC P3500 - Position: Front Left
- Sliding Caliper
- 1995-2002 GMC C3500HD - Position: Rear Left
- 1990-1990 Dodge W250 - Position: Front Left
- 4500 lb. Axle w/ Casting # 2238451 or 2238452 w/ 10mm Brake Hose Inlet
- 1983-1983 Chevrolet C60 - Position: Front Left
- 2001-2001 Isuzu FSR - Position: Rear
- w/ 2.88" Dual Piston Bendix Caliper
- 1994-1994 Chevrolet P30 - Position: Front Left
- Sliding Caliper
- 1983-1983 International 1754 - Position: Rear Left
- 1983-1989 International S1853 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1992-1997 International 3600 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1997 International 3800 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1995-1996 GMC P3500 - Position: Rear Left
- 1984-1984 Chevrolet P30 - Position: Rear Left
- 1998-2005 Freightliner MT45 - Position: Rear Left
- 1998-2005 Freightliner MT45 - Position: Front Left
- Single Piston Bendix Caliper w/ M10 x 1.5 Caliper Inlet
- 1991-1992 Dodge W250 - Position: Front Left
- w/ 10mm Brake Hose Inlet 4500 lb. Axle w/ Casting # 2238451 or 2238452
- 1984-1984 International 1724 - Position: Rear Left
- 1996-1997 International 4700LPX - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1983 International 1724 - Position: Front Left
- 1990-1990 GMC C5000 Topkick - Position: Front Left
- 1987-1987 Chevrolet C70 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1989 International 1654 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 2000-2000 Isuzu FSR - Position: Front
- w/ 2.88" Dual Piston Bendix Caliper
- 1983-1983 International 1824 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1991 GMC P3500 - Position: Rear Left
- Sliding Caliper
- 1987-1992 International 1452SC - Position: Front Left
- Forward Control w/ 3.38" Single Piston Bendix Caliper
- 1989-1989 GMC C5000 - Position: Rear Left
- 1989-1989 Chevrolet P30 - Position: Rear Left
- Sliding Caliper
- 1984-1984 International S1724 - Position: Rear Left
- 1989-1989 Chevrolet C70 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1990 Chevrolet P30 - Position: Rear Left
- 1983-1983 International S1723 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1986 Chevrolet C70 - Position: Front Left
- 1988-1988 Chevrolet C70 - Position: Front Left
- 1991-1993 Chevrolet P30 - Position: Rear Left
- Sliding Caliper
- 1987-1991 GMC R3500 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 1990-1990 Chevrolet P30 - Position: Front Left
- Sliding Caliper
- 1988-1988 Chevrolet C70 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1994 International 3700 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1983 Chevrolet G30 - Position: Front Left
- 13" X 2.5" Brake Shoe w/ 13" X 3 1/2" Brakes
- 1988-1989 Chevrolet C60 - Position: Rear Left
- 1990-1994 International 4600LP - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1985-1987 International 1754 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1997 International 4900 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1983 GMC C6000 - Position: Rear Left
- 1995-1996 Chevrolet P30 - Position: Rear Left
- Sliding Caliper
- 1984-1984 International S1753 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1989 GMC P3500 - Position: Front Left
- Sliding Caliper
- 1981-1981 International 1654 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1985 GMC C6000 - Position: Front Left
- 1986-1987 Chevrolet C60 - Position: Front Left
- 1989-1989 International S1654LP - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1996 Chevrolet G30 - Position: Front Left
- 13" X 2.5" Brake Shoe w/ 13" X 3 1/2" Brakes
- 1979-1983 Chevrolet P30 - Position: Front Left
- 1979-1983 GMC P3500 - Position: Rear Left
- 1987-1991 GMC V3500 - Position: Front Left
- 1987-1987 Chevrolet R30 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 1987-1989 GMC C7000 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1987-1989 GMC C7000 - Position: Front Left
- 1989-1991 Chevrolet R3500 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 2000-2000 Isuzu FSR - Position: Rear
- 1995-2002 GMC C3500HD - Position: Front Left
- Single Piston Caliper
- 1988-1989 Chevrolet C60 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1984-1985 International S1723 - Position: Rear Left
- 1985-1986 Chevrolet P30 - Position: Rear Left
- Sliding Caliper
- 1989-1991 Chevrolet V3500 - Position: Front Left
- 1992-1992 GMC P3500 - Position: Rear Left
- 1987-1988 Chevrolet V30 - Position: Front Left
- 1984-1985 International S1723 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1996-1999 Isuzu FSR - Position: Rear
- w/ 2.88" Dual Piston Bendix Caliper
- 1983-1989 International S1754 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1990-1990 Chevrolet C5500 Kodiak - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1983-1985 International S1754 - Position: Rear Left
- 1990-1997 International 4800 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1993-1993 Dodge W250 - Position: Front Left
- w/ Casting # 2238451 or 2238452 w/ 10mm Brake Hose Inlet 4500lb Axle Weight
- 1988-1988 GMC C5000 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 2002-2002 Isuzu FSR - Position: Rear
- 1979-1986 Chevrolet C30 - Position: Front Left
- w/ 13" x 3.5" Brakes
- 1987-1989 International M1400 Metro II - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper Stripped Chassis
- 1978-1978 GMC K35 - Position: Front Left
- w/ Dual Rear Wheels
- 1986-1987 Chevrolet C60 - Position: Rear Left
- w/ 3.38" Single Piston Bendix Caliper
- 1986-1989 GMC C6000 - Position: Rear Left
- 1995-1999 Chevrolet P30 - Position: Front Left
- 1984-1984 International S1753 - Position: Front Left
- 1990-1997 International 4700 - Position: Front Left
- w/ 3.38" Single Piston Bendix Caliper
- 1979-1982 Chevrolet G30 - Position: Front Left
- 13" X 3.5" Brake Shoe
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine