ACDelco 36-352800 Power Steering Pressure Line Hose Assembly

Power Steering Pressure Line Hose Assembly

Fits: 99-04 Ford F-250 Super Duty, 99-04 Ford F-350 Super Duty, 99-03 Ford F-450 Super Duty, 99-03 Ford F-550 Super Duty, 00-04 Ford Excursion

MPN
36-352800
$62.22
Out of stock
Power Steering Pressure Line Hose Assembly


BRAND: ACDelco




FEATURES:


  • Axle Seal;Control Arm Ball Joint;Differential Drive;Differential Gear;Differential Seal;Drive Shaft Seal;Half-Shaft;Half-Shaft Seal;Pinion Gear Bearing;Power Cylinder;Power Steering;Rack and Pinion;Steering Angle Sensor;Steering Gasket;Steering Gear;Steering Position Sensor;Steering Pump;Steering Seal;Steering Tie Rod;Steering Tie Rod End;Suspension Control Arm


SPECIFICS:


ACD_RemanDesNo
AltPA_14_mm879.35
AltPA_947_mm16.0
End 1 GenderMale
End 1 TypeSAE
End 2 GenderMale
End 2 TypeSAE
FAQ - A1No. It is not necessary to regularly check power steering fluid unless there is a leak suspected in the system or an unusual noise is heard. Fluid loss in this system could indicate a problem, and you should have the system inspected and repaired if you find evidence of a loss. Always reference your vehicle's service information for appropriate maintenance intervals.
FAQ - A2No. You will be able to steer your vehicle if the power steering goes out, but it will require more effort, especially at lower speeds. If your power steering goes out, have the system inspected and repaired as soon as possible.
FAQ - A3Yes. The power steering fluid should be flushed whenever a component is being replaced or the system has become contaminated.
FAQ - A4Yes. Use of the incorrect fluid may damage the vehicle, and the damages may not be covered by the vehicle or component's warranty. Always use the correct fluid listed in the manufacturer's service literature.
FAQ - Q1Do I need to change my power steering fluid regularly, even if there are no symptoms of problems with the system?
FAQ - Q2Will I be unable to steer my vehicle if my power steering goes out?
FAQ - Q3Should my power steering system be flushed every time it undergoes maintenance or component replacement?
FAQ - Q4Can using the incorrect fluid cause damage to my power steering system?
Features & Benefits - B1Silver heat guard helps protect hose in high-temperature areas
Features & Benefits - B10Hose cover is highly resistant to oil, heat, and ozone - conditions which cause ordinary hoses to fail prematurely
Features & Benefits - B11High tensile strength braided fabric help the lines withstand pulsation pressures up to 1,500 psi and bursting pressure up to 8,900 psi
Features & Benefits - B12Unique crimping methods ensure uniform connections between hose and end fittings
Features & Benefits - B13Built-in shock absorbing characteristics in hose help ensure proper resistance to fluid surges
Features & Benefits - B14Hose assembly is engineered with a muffler to act as a pump noise suppressor, helping assure quiet operation where required
Features & Benefits - B2Fluid restrictors help absorb vibration and reduce noise
Features & Benefits - B3Double-lock beading tube end provides crimping and assists in leak prevention for hose/coupling integrity
Features & Benefits - B4Switch sockets allow reinstallation of original equipment pressure sensors
Features & Benefits - B5End-lock tabs position hose for accurate alignment and routing
Features & Benefits - B6Movable mounting brackets allow easy and secure installation
Features & Benefits - B7Original style fitting means that no adapters are required
Features & Benefits - B8Split conduit (convoluted) hose protects vital areas
Features & Benefits - B9Zinc-aluminum alloy with an aluminum-rich epoxy top coating on tubes helps protect against rust and corrosion
Fitting MaterialSteel
Good Maintenance Practices - S1 B1Inspect power steering hoses regularly.
Good Maintenance Practices - S1 B2Check power steering fluid levels periodically and add fluid when necessary.
Good Maintenance Practices - S1 B3Have your vehicle inspected if it exhibits any of the following symptoms: unusual noise when turning the steering wheel, a shimmy or shake in the steering wheel, heavy or unresponsive steering at low speeds or during parking lot maneuvers, and/or the steering wheel does not properly return to center.
Good Maintenance Practices - S1 B4If you live in areas that experience harsh, winter weather, have the entire steering system inspected before winter arrives to help ensure safer driving.
Good Maintenance Practices - S1 B5It is a good idea to replace O-rings when doing any steering system service. Reusing old O-rings can cause leaks.
Good Maintenance Practices - S1 B6Always check the specific manufacturer's service information for the correct power steering fluid to use. Different fluids are specified by manufacturers to meet the operating requirements of their power steering systems.
Good Maintenance Practices - S1 B7Always check the specific manufacturer's service information for the correct power steering fluid to use. Different fluids are specified by the manufacturers to meet the operating requirements of their power steering systems. On some modern steering systems, brake fluids or transmission fluids may not be compatible with pump components. Using the wrong fluid could cause hose and seal damage as well as fluid leaks.
Good Maintenance Practices - S1 B8Keep in mind that fluid color is not an indication of fluid condition.
Good Maintenance Practices - S1 B9After any service of the power steering system, always bleed the air from the system and verify proper system operation. An accurate fluid level cannot be obtained unless air is bled from the steering system. The air in the fluid may cause pump cavitation noise as well as pump damage over a period of time.
Height3.25
Hose Fitting Thread Diameter0.63
Hose MaterialRubber/Steel
Hose ShapeMOLDED_ASSEMBLY
Keyword SearchACDelco; Professional Power Steering Pressure Line Hose Assembly; Power Steering Pressure Line Hose; Power Steering Pressure Line Hose Assembly; Pressure Line Hose; Pressure Line Hose Assembly
Length12.25
Marketing Statement - Product LineACDelco Professional Power Steering Products are the ideal replacement parts when you need uncompromising quality and solid value. From newly manufactured power steering hoses, seals, and steering pump rebuild kits, to remanufactured power steering pumps, rack and pinion assemblies, and integral steering gears, ACDelco Professional Power Steering Products offers a full line of Professional, premium aftermarket steering products to make part replacement simple and precise. Turn to ACDelco Professional Power Steering Products for high-quality, long-lasting components for GM vehicles as well as a wide range of other vehicles on the road today.
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Brackets IncludedNO
Product DescriptionACDelco Professional Power Steering Pressure Line Hose Assemblies are premium aftermarket replacement assemblies which effectively transfer high pressure power steering fluid from the vehicle's power steering pump to the power steering gear or rack and pinion assembly. Every power steering hose assembly comes complete with hoses, zinc or plated end fittings, brackets, sensor ports, sheathing, bushings, and grommets where required. Extensive field examination and testing has been carried out to assure the proper fit for many vehicles on the road today. These premium aftermarket replacement power steering pressure line hose assemblies are manufactured to meet your expectations for fit, form, and function. ? WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Difficulty steering and/or visible power steering fluid leakage indicates a sign of wear.
Signs of Wear & Troubleshooting - S1 B2Hose brittleness or hardness can be an early sign of internal wear.
Signs of Wear & Troubleshooting - S1 B3A soft, spongy hose is a more serious sign of wear that indicates advanced internal deterioration.
Signs of Wear & Troubleshooting - S1 B4External wear and abrasion can be caused by contact with the manifold or other engine parts. This issue may require hose replacement or realignment.
Signs of Wear & Troubleshooting - S1 B5Thick, sludgy fluid in the pump reservoir indicates internal hose wear and the need for a complete flush of the system.
Signs of Wear & Troubleshooting - S1 B6High temperature pulsations cause power steering hoses to deteriorate from the inside. The constant flexing and pressure surges result in the breaking off of small particles of hose, which are carried through the system and can lead to system malfunction.
Signs of Wear & Troubleshooting - S1 HSigns of wear include but are not limited to:
Vintage_Part_IndicatorN
Weight1.61
Width9.38

Hydroboost System


DOWNLOADS:




APPLICATIONS:


  • 1999-2004 Ford F-250 Super Duty - Position: Pump To Hydroboost
  • 2000-2004 Ford Excursion - Position: Pump To Hydroboost
  • 1999-2004 Ford F-350 Super Duty - Position: Pump To Hydroboost
  • 1999-2003 Ford F-550 Super Duty - Position: Pump To Hydroboost
  • 1999-2003 Ford F-450 Super Duty - Position: Pump To Hydroboost
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Compatible Vehicles

Year
Make
Model
Engine
Copyright © 2013-present PartsHawk, LLC. All rights reserved.