ACDelco 46A0891A | Steering Tie Rod End
Part Number
46A0891A
Special Price $42.49 Regular Price $49.99
In stock
Only 1 left
Estimated Ship Date: 1 Business Day or Less
ACDelco Advantage Steering Tie Rod Ends are economical replacement components for your GM and non-GM vehicle. They connect your vehicle's steering linkage to the steering knuckle. These dependable aftermarket steering tie rod ends offer quality and performance, all at an economical price. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Coated for corrosion resistance
- Consistent torque for smooth operation
- Dodge
- Dust boot is installed and attached to reduce contamination, increase durability, and extend service life
- Full ball stud
- Greaseable design for long life
- Low-friction double bearing for high impact resistance
- Manufactured at ISO 9001-certified facilities to ensure consistent high quality
- Polyurethane dust boot resists cracking, splitting, dry rot, and corrosion
- Superb strength for durability
- Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
SPECIFICS:
| Castle Nut Included | Yes |
| Color | Black |
| End 1 Gender | Male |
| End 2 Gender | Male |
| FAQ - Answer 1 | Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications. |
| FAQ - Answer 2 | Yes. Installing new tie rod ends or tie rod end adjusting sleeves can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following any tie rod and tie rod component replacement. |
| FAQ - Question 1 | Can I use ACDelco Advantage Chassis parts on my non-GM vehicle? |
| FAQ - Question 2 | Should I perform a vehicle alignment after installing new tie rod ends or tie rod end adjusting sleeves? |
| Finish | Plain |
| Good Maintenance Practices - Section 1 - Bullet 1 | Inspect or have your tie rod components inspected for signs of wear. Potholes, bumpy road conditions, and minor accidents can all result in tie rod wear, and in extreme instances, bending or breakage. Inspect your tie rod components regularly, following exposure to events that may harm them, or when you experience signs of tie rod component wear. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Keep your tie rod ends lubricated. Road hazards like rough terrain or hitting curbs can damage tie rods and cause lubrication to leak out. Once lubrication is lost, the tie rod may loosen and bind up, preventing proper function. Check or have your tie rod ends checked and lubricated if necessary. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Use a sleeve rotating tool to rotate your tie rod end adjusting sleeve and apply penetrating oil to the clamps and sleeve before loosening it. Proper sleeve rotation is key to helping prevent damage and a loose fit between the sleeve and tie rod end. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Installation of new tie rod components can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any tie rod replacement. |
| Grease Fitting Included | Yes |
| Material | Steel |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Unexpected noises: clunking noises while turning your vehicle's steering wheel may indicate tie rod end and sleeve wear. A knocking sound from the front end of the vehicle during low speed steering often indicates a problem with the outer tie rod end. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle wandering: if your vehicle pulls to the side while driving at speed, braking, or going over bumps, tie rod end and sleeve wear may be the cause. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Tire wear: excessive tire wear may indicate tie rod end and sleeve wear. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Sagging tires: bad tie rods cannot properly support the wheels of your vehicle, resulting in sagging tires as a common sign of tie rod problems. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vibration while driving: loose tie rod connections will allow your tire to wobble on its axis. This wobble may be felt as a vibration or shaking in the steering wheel and front axle while driving your vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Excessive play in steering linkage: excessive movement or play in your vehicle's steering linkage may indicate tie rod end and sleeve wear. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | Alignment issues: an inability to set the proper alignment for your vehicle may be a sign of tie rod end and sleeve wear. |
| Tie Rod End Thread Diameter (in) | 0.787 |
| Tie Rod End Thread Diameter (mm) | 20 |
| Type | Outer |
DOWNLOADS:
APPLICATIONS:
- 2000-2001 Dodge Ram 1500 - Position: Outer
- 2000-2002 Dodge Ram 3500 - Position: Outer
- 2000-2002 Dodge Ram 2500 - Position: Outer
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine