Only 9 left
Estimated Ship Date: 1 Business Day or Less
Arnott part AS-2821 (AS-2822 Left) is a new, not remanufactured, aftermarket rear strut assembly for the 2007-2013 Mercedes Benz S-Class (W221) and 2007-2014 CL-Class (W216) Sedan with AIRMATIC and both with and without 4MATIC. This replacement strut, designed and assembled in the USA, features a new custom-valved shock absorber assembled with a durable new Continental ContiTech rubber air spring bladder and no lower isolator seal which is subject to failure on the O.E. The strut is partly protected by an aluminum can and dust baffle to keep out debris and is assembled with heavy-duty crimping rings, seals, O-Rings and bumpstop. This fully assembled air strut plugs directly into the vehicle's electronic connector and eliminates fault codes
BRAND: Arnott Industries
- Suspension Strut Assembly
- Air Suspension Strut
- Mercedes-Benz: 2213205813
- Mercedes-Benz: 2213205613
- Mercedes-Benz: 221320561380
- Mercedes-Benz: 221320561389
- Mercedes-Benz: 221320581380
- 2007-2014 Mercedes-Benz CL550 - Position: Rear Right
- 2007-2013 Mercedes-Benz CL500 - Position: Rear Right
- 2007-2013 Mercedes-Benz S65 AMG - Position: Rear Right
- 2008-2011 Mercedes-Benz S450 - Position: Rear Right
- 2007-2013 Mercedes-Benz S600 - Position: Rear Right
- 2008-2014 Mercedes-Benz CL65 AMG - Position: Rear Right
- 2008-2013 Mercedes-Benz S63 AMG - Position: Rear Right
- 2010-2013 Mercedes-Benz S400 - Position: Rear Right
- 2007-2014 Mercedes-Benz CL600 - Position: Rear Right
- 2011-2013 Mercedes-Benz S350 - Position: Rear Right
- 2007-2011 Mercedes-Benz S500 - Position: Rear Right
- 2007-2013 Mercedes-Benz S550 - Position: Rear Right
- 2013-2013 Mercedes-Benz S500 - Position: Rear Right
- 2008-2014 Mercedes-Benz CL63 AMG - Position: Rear Right
How often should shock absorbers be replaced?
Shock absorbers should generally be replaced every 50,000 miles or every 5-7 years
How to replace shock absorbers?
To replace shock absorbers, you need to remove the wheel and tire assembly, unbolt the old shock absorber, replace it with a new one, and tighten the bolts. Then, reinstall the wheel and tire, and test the new shocks.
Why do shock absorbers leak?
Shock absorbers can leak due to worn seals, damage to the piston or cylinder, or corrosion from exposure to moisture and road salt.
Can shock absorbers be replaced?
Yes, shock absorbers can be replaced when they start to wear out or fail.