Part Number
2101
$278.02
---------OR---------
In stock
Free Shipping
Estimated Ship Date: 1 Business Day or Less
Edelbrock part #2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
WARRANTY TIME: 12 Months
BRAND: Edelbrock
FEATURES:
- Accepts A/C And Alternator
- Performer Intake Manifold for 1955-86 Small-Block Chevy; Satin Finish
- MANIFOLD; 1955-86 SB CHEVY; PERFORMER; NON-EGR
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- • Manifold height: A-3.50in.; B-4.60in. • Carb pad height: 4.05in. • Carb recommendations: OEM 4-Bbl; Use choke rod # 9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket # 8031 or # 8036 for 1972-1978. • Port exit dimensions: 1.14in. x 1.88in. • Recommended intake gasket: Edelbrock # 7201. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant # 1076; DO NOT USE END SEALS GASKETS. • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. • DO NOT OVERTIGHTEN NPT/Pipe fittings; this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. • Choke plate # 8901 included • Even though manifolds are compatible with EGR systems; this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality. • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
- For Idle to 5500 RPM Street-Driven Performance
- { eo : 9in.}
- Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
- 50-State Street Legal if Correct Carburetor Used
- Excellent Throttle Response and Mid-Range Power
- Patented Runner Design Ensures Broad Torque Curve
- Edelbrock; Performer; Camshaft; lifters; RV cam; Performer-Plus; Camshaft Kit; Cam and lifter kit; hydraulic lifters; flat tappet; 2102; 265-400;V8; 1957-86
- Intake Mnfld
- Performer Series Intake Manifold
- Accepts Exhaust Heated Chokes
- Accepts Late-Model Choke; Water Neck; And HEI
- MANIFOLD
SPECIFICS:
Cylinder Head Type | Standard |
Emission | Without EGR |
Engine Make/Size | Chevy Small Block (262-400) |
Number of Carbs | One |
Position | N/A |
RPM Range | Idle -5500 |
Usage | Street/Hi-Performance |
WARNING CA Proposition 65 | Yes |
WARNING CA Proposition 65 Message | WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
DOWNLOADS:
WARRANTY TIME: 12 Months
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine