Part Number
20-1401
Special Price $111.49 Regular Price $123.88
Out of stock
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
BRAND: Cardone Reman
FEATURES:
- Ford Edge 2010-07, Fusion 2012-10; Lincoln MKX 2010-07, MKZ 2012-07
- Power Steering Pump
- Power Steering Pump, Steering Pump, Pump and Reservior
- Reman. Power Steering Pump
- Remanufactured Power Steering Pump
SPECIFICS:
E-Waste | No |
FAQs | Why do I still have hard steering in one direction after I replaced the pump? |
FAQs | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
FAQs | Why is the pump making a whining noise all of the time? |
FAQs | The problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary. |
FAQs | The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced. |
FAQs | Should I ever change my fluid, even though nothing is wrong? |
FAQs | A whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system. |
FAQs | Most likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring. |
FAQs | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Features and Benefits | Units are supplied with 100% tested and calibrated pressure relief valves. |
Features and Benefits | Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life. |
Features and Benefits | All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material. |
Features and Benefits | All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability. |
Features and Benefits | FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance. |
Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
Hose Port Type | O-Ring |
Housing Material | Aluminum |
Mounting Hardware Included | No |
Package Contents | Hydraulic Pump; Instruction Sheet; Sealing Kit |
Power Steering Outlet ID Size | 0 |
Power Steering Outlet Thread Size | 14x1.5 |
Power Steering Pump Inlet Attachement Type | Hose Barb |
Power Steering Pump Outlet Attachment Type | Threaded |
Power Steering Pump Outlet Quantity | 1 |
Power Steering Reservoir Cap Included | No |
Product Condition | Remanufactured |
Pulley Attachement Type | Press-On |
Pulley Included | Yes |
Remote Reservoir | Yes |
Reservoir Included | No |
INTERCHANGE:
- Ford: AH6Z3A696A
- Lincoln: AH6Z3A696A
- Lincoln: 7T4Z3A696A
- Ford: 7T4Z3A696A
- Lincoln: 7H6Z3A696A
- Lincoln: 9T4Z3A696A
- Ford: 8T433A696AA
- Ford: 9T4Z3A696A
- Ford: AH6C3D639AB
- Ford: 9T433A696AA
- Ford: AH6Z3A393A
APPLICATIONS:
- 2007-2010 Lincoln MKX
- 2007-2012 Lincoln MKZ
- 2007-2010 Ford Edge
- 2010-2012 Ford Fusion
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine