ACDelco 46d2136a | Front Lower Suspension Ball Joint

Part Number
46d2136a
Suspension Ball Joint

Fits: 85-90 Buick Electra, 85-93 Cadillac Commercial Chassis, 85-93 Cadillac DeVille, 85-92 Cadillac Fleetwood, 85-96 Oldsmobile 98, 86-99 Buick LeSabre, 86-91 Oldsmobile Delta 88, 87-99 Pontiac Bonneville, 91-96 Buick Park Avenue, 92-99 Oldsmobile 88, 96-99 Oldsmobile LSS, 97-98 Oldsmobile Regency

Special Price $30.59 Regular Price $35.99
---------OR---------
In stock
Only 9 left
Free Shipping
Estimated Ship Date: 1 Business Day or Less
ACDelco Advantage Ball Joints are economical replacement components for your GM and non-GM vehicle. These ball joints connect your vehicle's control arm to its steering knuckle, and feature a polyurethane dust boot and one-piece housing. These dependable aftermarket suspension ball joints offer quality and performance, all at an economical price. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov


BRAND: ACDelco




FEATURES:


  • Buick;Cadillac;Oldsmobile;Pontiac
  • Coated for corrosion resistance
  • Cost effective option for convenience
  • Forged housing for durability
  • Forged, machined shell provides strength
  • Manufactured at ISO 9001-certified facilities
  • Undergo extreme impact, wear, and fatigue testing to ensure quality and durability


SPECIFICS:


AdjustableNo
Ball Joint AssemblyYes
Castle Nut IncludedYes
Cotter Pin HoleYes
Dust Boot IncludedYes
FAQ - Answer 1Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
FAQ - Answer 2Yes. You should replace your ball joints as a set to make front end alignment easier.
FAQ - Answer 3Yes. Installing new ball joints can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following ball joint replacement.
FAQ - Question 1Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
FAQ - Question 2Should I replace my ball joints as a set?
FAQ - Question 3Should I perform a vehicle alignment after installing ball joints?
Good Maintenance Practices - Section 1 - Bullet 1Inspect or have your ball joints inspected for signs of wear. Over time, lubrication inside the ball joint can dry out, leading to joint wear. Even sealed ball joints can be exposed to air, and if the ball joint's protective boot is damaged, dirt and debris could further harm the function and life of the joint. Exposure to harsh driving conditions like pot holes, bumpy road surfaces, or road salt may also cause ball joints to fail. Worn ball joints could result loss of vehicle control or tire damage. Inspect your ball joints regularly, following exposure to events that may harm the component, or when you experience signs of ball joint wear.
Good Maintenance Practices - Section 1 - Bullet 2Use new components during installation. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 3Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make alignment easier.
Good Maintenance Practices - Section 1 - Bullet 4Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
GreasableYes
MaterialSteel
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Hole Quantity3
Mounting TypeBolt-In
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Unexpected noises: a squeaking noise when your vehicle accelerates, hits a bump, or stops may indicate worn ball joints. Noises that the ball joint makes as it begins to wear can start as minor clicks felt in the steering wheel, and gradually progress to loud thumping and clunking noises as wear worsens. These sounds are particularly obvious when your vehicle shifts its weight to and from the wheel with the bad ball joint, such as when driving over a pothole.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Unexpected vibration: vibrations at higher vehicle speeds may indicate worn ball joints.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Loose or stiff steering: difficulty steering and handling your vehicle may indicate worn ball joints. If steering feels loose or sloppy, then the ball joint and socket may be wearing out together, the ball joint becoming smaller and the socket gap increasing. However, worn ball joints may also lead to tight or stiff steering, making it difficult to turn quickly and smoothly.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Tire wear: as ball joints wear, they allow the front wheels of your vehicle to point outward and away from each other in a 'toe-out' position. This position will result in uneven wear on one side of your tire that feathers across the tread toward its center. Worn ball joints may also be signaled by a more extreme variation of uneven tire wear, called camber wear, where the tire leans in or out at the top, and a hard line of excess wear is seen along one edge of your vehicle's tire.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Alignment issues: an inability to set your vehicle's alignment to proper specifications may be a sign of ball joint wear.
Stud TypeThreaded
Suspension Grade TypeStandard
TypeBolt-On



DOWNLOADS:




APPLICATIONS:


  • 1985-1993 Cadillac DeVille - Position: Front Lower
  • 1987-1999 Pontiac Bonneville - Position: Front Lower
  • 1986-1991 Oldsmobile Delta 88 - Position: Front Lower
  • 1991-1996 Buick Park Avenue - Position: Front Lower
  • 1997-1998 Oldsmobile Regency - Position: Front Lower
  • 1986-1999 Buick LeSabre - Position: Front Lower
  • 1985-1992 Cadillac Fleetwood - Position: Front Lower
  • 1985-1993 Cadillac Commercial Chassis - Position: Front Lower
  • 1996-1999 Oldsmobile LSS - Position: Front Lower
  • 1992-1999 Oldsmobile 88 - Position: Front Lower
  • 1985-1990 Buick Electra - Position: Front Lower
  • 1985-1996 Oldsmobile 98 - Position: Front Lower
Customer Questions
How do suspension stabilizer bars work?
Suspension stabilizer bars, or sway bars, reduce body roll during turns by connecting the suspension on opposite sides of the vehicle and distributing the force of the turn more evenly between the wheels.
Do stabilizer bars affect steering?
Yes, stabilizer bars can affect steering by reducing body roll during turns and improving handling and stability.
Where is the stabilizer bar link?
The stabilizer bar link is a small metal rod with ball joints that connects the stabilizer bar to the suspension system of a vehicle. It is typically located near the wheels and attaches to the control arm or strut of the suspension.
What is the suspension stabilizer bar link?
The suspension stabilizer bar link is a component that connects the suspension stabilizer bar to the suspension system of a vehicle, allowing the stabilizer bar to effectively reduce body roll during turns and improve the handling and stability of the vehicle. It is typically a small metal rod with ball joints on each end.
Does AC Delco make Ford parts?
No, AC Delco produces parts primarily for General Motors vehicles and does not make parts specifically for Ford vehicles.
Can I use AC Delco parts to replace OEM parts?
Yes, in most cases AC Delco parts can be used as a replacement for OEM parts. However, it's important to ensure that the parts are compatible with your specific make and model of vehicle.
What AC Delco oil filter do I need?
AC Delco offers a variety of oil filters that are compatible with different makes and models of vehicles. To determine which AC Delco oil filter you need, consult your vehicle's owner's manual or use our online filter lookup tool that matches the make, model, and year of your vehicle.
Please, mind that only logged in users can submit questions

Compatible Vehicles

Year
Make
Model
Engine
Copyright © 2013-present PartsHawk, LLC. All rights reserved.