Part Number
20-7920
Special Price $76.23 Regular Price $89.68
---------OR---------
In stock
Only 5 left
Estimated Ship Date: 1 Business Day or Less
Description
Power Steering PumpCARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Specifications
E-Waste: | No |
FAQs: | A whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system. |
FAQs: | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
FAQs: | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
FAQs: | Most likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring. |
FAQs: | Should I ever change my fluid, even though nothing is wrong? |
FAQs: | The end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced. |
FAQs: | The problem is most likely in the steering unitGêÆthe pump does not know left from right. Check for binding steering components and repair as necessary. |
FAQs: | Why do I still have hard steering in one direction after I replaced the pump? |
FAQs: | Why is the pump making a whining noise all of the time? |
FAQs: | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Features and Benefits: | All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability. |
Features and Benefits: | All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits: | FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance. |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
Features and Benefits: | Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life. |
Features and Benefits: | Units are supplied with 100% tested and calibrated pressure relief valves. |
Hose Port Type: | O-Ring |
Housing Material: | Cast Iron |
Mounting Hardware Included: | No |
Package Contents: | Hydraulic Pump; Instruction Sheet; Sealing Kit |
Power Steering Outlet ID Size: | 0 |
Power Steering Outlet Thread Size: | 16x1.5 |
Power Steering Pump Inlet Attachement Type: | Hose Barb |
Power Steering Pump Outlet Attachment Type: | Threaded |
Power Steering Pump Outlet Quantity: | 1 |
Power Steering Reservoir Cap Included: | No |
Product Condition: | Remanufactured |
Pulley Attachement Type: | Press-On |
Pulley Included: | No |
Remote Reservoir: | No |
Reservoir Included: | Yes |
Interchange
- GMC: 7839797
- Chevrolet: 7839818
- Chevrolet: 7839797
- GMC: 7839818
Fitment
- 1980-1986 Chevrolet K20
- 1980 Chevrolet K30
- 1980-1986 Chevrolet K5 Blazer
- 1980-1981 Chevrolet P20
- 1980-1986 GMC C1500
- 1980-1986 GMC C1500 Suburban
- 1980-1986 GMC K1500 Suburban
- 1980-1986 GMC K2500
- 1980-1986 GMC K2500 Suburban
- 1980 GMC K3500
- 1980-1981 GMC P3500
- 1987 Chevrolet R10
- 1987 Chevrolet R20
- 1980-1986 Chevrolet C10
- 1980-1986 Chevrolet C10 Suburban
- 1980-1987 Chevrolet C20
- 1980-1986 Chevrolet C20 Suburban
- 1980-1986 Chevrolet K10
- 1980-1986 Chevrolet K10 Suburban
- 1980-1986 Chevrolet K20 Suburban
- 1980-1981 Chevrolet P30
- 1980-1986 GMC C2500
- 1980-1986 GMC C2500 Suburban
- 1980-1986 GMC Jimmy
- 1980-1986 GMC K1500
- 1980-1981 GMC P2500
- 1986 GMC C3500
- 1987 Chevrolet V10
- 1987 GMC R1500
- 1987 GMC R2500
- 1987 GMC V1500
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine