Cardone 21-5931 | Power Steering Pump
Part Number
21-5931
Special Price $165.19 Regular Price $183.54
---------OR---------
In stock
Only 4 left
Estimated Ship Date: 1 Business Day or Less
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
BRAND: Cardone Reman
FEATURES:
- Lexus ES300 2001-97, RX330 2006-04; Toyota Avalon 2004-95, Camry 2006-95, Highlander 2007-04, Sienna 2003-98, Solara 2003-99
- Power Steering Pump
- Power Steering Pump, Steering Pump, Pump, Hydraulic Power Steering Pump
- Reman. Power Steering Pump
- Remanufactured Power Steering Pump
SPECIFICS:
| E-Waste | No |
| FAQs | Most likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring. |
| FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
| FAQs | The problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary. |
| FAQs | Should I ever change my fluid, even though nothing is wrong? |
| FAQs | Why do I still have hard steering in one direction after I replaced the pump? |
| FAQs | The end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced. |
| FAQs | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
| FAQs | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
| FAQs | Why is the pump making a whining noise all of the time? |
| FAQs | A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures. |
| Features and Benefits | All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability. |
| Features and Benefits | Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life. |
| Features and Benefits | Units are supplied with 100% tested and calibrated pressure relief valves. |
| Features and Benefits | FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance. |
| Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
| Features and Benefits | All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material. |
| Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
| Hose Port Type | Seat |
| Housing Material | Cast Iron/Aluminum |
| Mounting Hardware Included | No |
| Package Contents | Hydraulic Pump; Instruction Sheet; Sealing Kit |
| Power Steering Outlet ID Size | 0 |
| Power Steering Outlet Thread Size | 16x1.5 |
| Power Steering Pump Inlet Attachement Type | Hose barb |
| Power Steering Pump Outlet Attachment Type | Threaded |
| Power Steering Pump Outlet Quantity | 1 |
| Power Steering Reservoir Cap Included | No |
| Product Condition | Remanufactured |
| Pulley Attachement Type | Bolt-On |
| Pulley Included | No |
| Remote Reservoir | Yes |
| Reservoir Included | No |
INTERCHANGE:
- Lexus: 4432007012
- Toyota: 4432033150
- Lexus: 4432033110
- Toyota: 4432007011
- Lexus: 4432048040
- Lexus: 4432007011
- Toyota: 4432048040
- Toyota: 4432007010
- Toyota: 4432007012
- Lexus: 4432033111
APPLICATIONS:
- 2004-2006 Lexus RX330
- 1997-2001 Lexus ES300
- 1999-2003 Toyota Solara
- 1995-2006 Toyota Camry
- 1998-2003 Toyota Sienna
- 2004-2007 Toyota Highlander
- 1995-2004 Toyota Avalon
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine