Cardone 42-3037 | Rear Left Power Window Motor

Part Number
Power Window Motor

Fits: 00-07 Ford F-250 Super Duty, 00-07 Ford F-350 Super Duty, 00-07 Ford F-450 Super Duty, 00-09 Ford F-550 Super Duty, 11-12 Ford F-550 Super Duty, 11-12 Ford F-250 Super Duty, 11-12 Ford F-350 Super Duty, 11-12 Ford F-450 Super Duty

Special Price $59.49 Regular Price $69.99
Out of stock
Free Shipping
CARDONE® Remanufactured Window Lift Motors are direct-fit O.E. replacements that began as Original Equipment cores. Each unit is re-engineered, renewed and tested to match O.E. performance. For nearly half a century, CARDONE Remanufactured Window Lift Motors have provided rock-solid reliability that you can trust for the long haul.

BRAND: Cardone Reman


  • Ford F-250 Super Duty 2012-11 2007-00, F-350 Super Duty 2012-11 2007-00, F-450 Super Duty 2012-11 2007-00, F-550 Super Duty 2012-11 2009-00
  • Power Window Motor
  • Power Window Motor, Window Motor, Window Lift Motor
  • Reman. Power Window Motor
  • Remanufactured Power Window Motor


FAQsDo all vehicles with power windows have an anti-pinch safety feature?
FAQsWhat’s an anti-pinch safety feature?
FAQsHow can I tell if my vehicle has an anti-pinch window lift motor?
FAQsWhat causes noisy operation or popping on a window lift motor with a cable-type regulator design?
FAQsDry or worn weather-strip and tracks, dirty switch contacts, or damaged window regulator could be causing these problems.
FAQsCan I bench-test a case grounded motor?
FAQsNoisy operation or a popping sound can be misdiagnosed as a window lift motor problem. What may actually be happening is the regulator cable hold-down may be broken or missing; this would allow the cable to snag on the window regulator bracket as the window is raised, producing the noise. Install a new hold-down or suitable substitute.
FAQsThe anti-pinch feature was introduced by Opel in 1986. Most vehicles built after 2008 with an auto-up and auto-down switch option have an anti-pinch safety feature.
FAQsIs it necessary to reset a motor that has the anti-pinch safety feature after installation?
FAQsThe anti-pinch safety feature prevents the window glass from reaching the end of its upward travel when the system senses an obstacle in the path of the glass.
FAQsMy window drops 2 to 3 inches from the upper window channel, then stops when I use the “Auto-Up” feature in my Toyota or Nissan. What’s causing this?
FAQsAn external module monitors the rotation of the internal gear. If there is a change in the pulse train of the sensor before the window if fully closed, the module will interpret this change as something preventing the window from moving easily, which causes the module to change polarity to the motor to reverse its direction.
FAQsWhat are the advantages of Phenolic pistons over steel?
FAQsWhy does my 2-wire window lift motor only run in one direction?
FAQsHow does the anti-pinch safety feature work?
FAQsThe likely cause is a window lift motor that was bench-tested or operated before being installed into the window regulator. This action cancels the upper limit position. All express up/down motors are shipped in the “full up” position and should not be bench-tested until fully coupled with the regulator. If disturbed, the motor’s travel limits must be set for the motor to know whether the window is closed or open. Follow the correct procedure as stated in a vehicle specific service manual or web-based tutorial to set travel limits.
FAQsMost 2-terminal or 2-wire motors are grounded through the control switch; however, some older applications use the motor housing as a common ground. If power supply and ground are applied directly to the terminals of a motor with this design, an internal short may result. These motors require a battery ground be directly applied to the housing, and then power can be applied to either terminal.
FAQsNot if the motor is installed and is not disturbed from its factory-set position. If the motor is operated before being coupled to regulator, then it will need to be reset.
FAQsThe vehicle may have faulty wiring or a defective control switch. Most 2-wire window lift motors depend on a voltage polarity change to control direction. If the motor runs in one direction but not the other, the problem is most likely in the wiring or switch. On some older GM applications, the ground is always applied to the motor body, with direction switching being controlled by whichever of the two pins receives voltage.
FAQsA motor equipped with an anti-pinch safety feature typically has 5 or more terminals or pins as well as an express-up feature on the window switch.
Features and BenefitsEach motor is 100% tested. Testing includes loading the motor on a simulated window fixture to verify speed and strength of the motor
Features and BenefitsEvery motor has its internal components inspected and gauged. Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation
Features and BenefitsEvery remanufactured motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
Features and BenefitsFor motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the ‘full up position’
Features and BenefitsMotor magnets are 100% recharged, guaranteeing efficiency and reliability
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsEvery remanufactured motor is fully compatible with the O.E. mounting and regulator
Features and BenefitsInternal gears are gauged, inspected and renewed for reuse or replaced if out of spec. Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Gear IncludedYes
Mounting Hole Quantity3
Mounting TypeThrough Hole
Package ContentsWindow Lift Motor, Instruction Sheet
Product ConditionRemanufactured
Regulator IncludedNo
Window Motor Use LocationRear Left
Wire Quantity2



  • Ford: 8C3Z2627001B
  • Ford: YC3Z3523395BA


  • 2011-2012 Ford F-250 Super Duty - Position: Rear Left
  • 2000-2007 Ford F-350 Super Duty - Position: Rear Left
  • 2000-2007 Ford F-250 Super Duty - Position: Rear Left
  • 2011-2012 Ford F-550 Super Duty - Position: Rear Left
  • 2011-2012 Ford F-350 Super Duty - Position: Rear Left
  • 2000-2009 Ford F-550 Super Duty - Position: Rear Left
  • 2011-2012 Ford F-450 Super Duty - Position: Rear Left
  • 2000-2007 Ford F-450 Super Duty - Position: Rear Left
Customer Questions
Does Cardone offer a warranty?
Cardone offers a limited lifetime warranty on most of their automotive parts.
What are the key features of Cardone's manufactured products?
The key features of Cardone's remanufactured products include cost-effectiveness, quality control, and environmental sustainability.
How to choose the right Cardone product?
To choose the right Cardone product for your specific vehicle make and model, it is recommended to use our Year, Make, Model search at the top of the website.
How does Cardone Industries ensure quality?
Cardone ensures the quality and reliability of their remanufactured parts through rigorous testing and inspection processes.
Please, mind that only logged in users can submit questions

Compatible Vehicles

Copyright © 2013-present PartsHawk, LLC. All rights reserved.