Cardone 60-1000 | CV Axle Assembly

Part Number
60-1000
CV Axle Assembly

Fits: 83-96 Chevrolet S10, 83-94 Chevrolet S10 Blazer, 83-90 GMC S15, 83-91 GMC S15 Jimmy, 91-96 GMC Sonoma, 91 GMC Syclone, 91-94 Oldsmobile Bravada, 92-96 GMC Jimmy, 92-93 GMC Typhoon, 96 Oldsmobile Bravada, 95-96 Chevrolet Blazer

Special Price $81.59 Regular Price $95.99
---------OR---------
In stock
Only 9 left
Free Shipping
Estimated Ship Date: 1 Business Day or Less
CARDONE's extensive experience in testing and engineering CV Drive Axles is the foundation behind our proprietary method of engineering a product that meets and even exceed O.E. performance. We have researched the reasons why original CVs typically fail and designed new solutions to avoid repeat failure. For example, our Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and ozone cracking - the leading cause of boot failure. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.


BRAND: Cardone Reman




FEATURES:


  • Remanufactured CV Axle Assembly
  • CV Axle Assembly
  • Reman. CV Axle Assembly
  • CV, CV Axle, CV Drive Axle, CV Axle Shaft, Halfshaft, Constant Velocity Axle, Constant Velocity Drive Axle, Axle Shaft
  • Chevrolet Blazer 1996-95, S10 1996-83, S10 Blazer 1994-83; GMC Jimmy 1996-92, S15 1990-83, S15 Jimmy 1991-83, Sonoma 1996-91, Syclone 1991, Typhoon 1993-92; Oldsmobile Bravada 1996 1994-91
  • CV Axle Assembly


SPECIFICS:


ABS Ring IncludedNo
Axle Nut Locking TypeSelf Lock
Compressed Length (in)18.9685
E-WasteNo
FAQsAlways use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.
FAQsThe most likely cause is a broken bearing cage due to excessive torque load.  This is typically an outboard joint problem.
FAQsThe most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.
FAQsThe most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.
FAQsThe old CV Drive Axle has a locking style (prevailing torque) nut.  Should I reuse it?
FAQsThe transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.
FAQsWhen I replace the CV drive axles, should I reuse the old seals?
FAQsWhen the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.
FAQsThe CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?
FAQsAre the CV Drive Axle shafts balanced at the factory?
FAQsI hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?
FAQsIs it OK to use an impact hammer to install the retaining nut?
FAQsNever use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.
FAQsNO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.
FAQsThe most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.
FAQsWhen I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?
FAQsCan I let the CV Drive Axles hang while I am working on the car?
FAQsI installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?
FAQsI removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?
FAQsNever allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.
FAQsShafts are inspected 100% for run out to prevent vibrations.  Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly.
FAQsThe wheels wobble when I make a turn. What's the problem?
FAQsWhen I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?
FAQsWhen replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.
Features and BenefitsCV Drive Axle shafts are inspected for run out to prevent vibration.
Features and BenefitsHigh-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsBoot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Features and BenefitsCV Drive Axle is measured after assembly to ensure proper fit.
Features and BenefitsNeoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsSplines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
Features and BenefitsHigh-quality grease withstands high-temperature and pressure extremes, which extends joint life.
Features and BenefitsThreads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
Input Shaft Bolt Count6
Input Shaft Connection StyleBolt-On
Output Shaft Connection StyleSpline
Output Shaft Spline Count27
Package ContentsComplete Axle
Product ConditionRemanufactured
Spindle Nut IncludedYes
Spindle Nut Thread SizeM24X1.5



DOWNLOADS:





WARRANTY TIME: 12 Months


INTERCHANGE:


  • General Motors: 26027966
  • Oldsmobile: 26055390

APPLICATIONS:


  • 1983-1990 GMC S15 - Position: Front Left
  • 1995-1996 Chevrolet Blazer - Position: Front Left
  • 1983-1996 Chevrolet S10 - Position: Front Left
  • 1992-1996 GMC Jimmy - Position: Front Left
  • 1983-1994 Chevrolet S10 Blazer - Position: Front Left
  • 1991-1996 GMC Sonoma - Position: Front Left
  • 1991-1994 Oldsmobile Bravada - Position: Front Right
  • 1991-1994 Oldsmobile Bravada - Position: Front Left
  • 1996-1996 Oldsmobile Bravada - Position: Front Left
  • 1992-1993 GMC Typhoon - Position: Front Right
  • 1983-1991 GMC S15 Jimmy - Position: Front Right
  • 1991-1991 GMC Syclone - Position: Front Right
  • 1983-1991 GMC S15 Jimmy - Position: Front Left
  • 1983-1994 Chevrolet S10 Blazer - Position: Front Right
  • 1991-1996 GMC Sonoma - Position: Front Right
  • 1995-1996 Chevrolet Blazer - Position: Front Right
  • 1992-1993 GMC Typhoon - Position: Front Left
  • 1983-1996 Chevrolet S10 - Position: Front Right
  • 1996-1996 Oldsmobile Bravada - Position: Front Right
  • 1983-1990 GMC S15 - Position: Front Right
  • 1992-1996 GMC Jimmy - Position: Front Right
  • 1991-1991 GMC Syclone - Position: Front Left
Customer Questions
Does Cardone offer a warranty?
Cardone offers a limited lifetime warranty on most of their automotive parts.
What are the key features of Cardone's manufactured products?
The key features of Cardone's remanufactured products include cost-effectiveness, quality control, and environmental sustainability.
How to choose the right Cardone product?
To choose the right Cardone product for your specific vehicle make and model, it is recommended to use our Year, Make, Model search at the top of the website.
How does Cardone Industries ensure quality?
Cardone ensures the quality and reliability of their remanufactured parts through rigorous testing and inspection processes.
Please, mind that only logged in users can submit questions

Compatible Vehicles

Year
Make
Model
Engine
Copyright © 2013-present PartsHawk, LLC. All rights reserved.