Cardone 67-3008 | Fuel Injection Throttle Body
Part Number
67-3008
Special Price $138.02 Regular Price $153.35
---------OR---------
In stock
Only 1 left
Estimated Ship Date: 1 Business Day or Less
Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
WARRANTY TIME: 12 Months
BRAND: Cardone Reman
FEATURES:
- Buick Rainier 2007-05; Cadillac Escalade 2008-07, Escalade ESV 2008-07, Escalade EXT 2008-07; Chevrolet Avalanche 2008-07, Cheyenne 2008-07, Express 1500 2008, Express 2500 2008, Express 3500 2008, Silverado 1500 2008-07, Silverado 2500 HD 2008-07, Silver
- Fuel Injection Throttle Body
- Reman. Fuel Injection Throttle Body
- Remanufactured Fuel Injection Throttle Body
- Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
SPECIFICS:
| E-Waste | Yes |
| FAQs | Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application. |
| FAQs | The OE throttle body has coolant hoses attached. What’s the purpose? |
| FAQs | Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response? |
| FAQs | How do you test? |
| FAQs | What do you replace? |
| FAQs | We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function. |
| FAQs | Is there anything that has to be done after installing the replacement throttle body? |
| FAQs | We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components. |
| FAQs | Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application. |
| FAQs | The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management. |
| FAQs | What causes the Electronic Throttle Body to fail? |
| FAQs | Do all throttle bodies have an ice breaker mode for extreme cold starts? |
| FAQs | Is it ok to bypass the coolant hoses? |
| FAQs | What else does the throttle body control other than idle air bypass and acceleration throughout driving range? |
| FAQs | What’s an Electronic Throttle body? |
| FAQs | A relearn calibration procedure is necessary after installation of replacement throttle body. |
| FAQs | The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures. |
| FAQs | Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points. |
| FAQs | No; bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses. |
| FAQs | When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle rpm. |
| FAQs | How do you clean? |
| FAQs | The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module. |
| FAQs | We do not sell Throttle Body spacers nor do we recommend the use of a spacer. |
| FAQs | What happens when an Electronic Throttle Body fails? |
| FAQs | Do you sell throttle body spacers? |
| FAQs | The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both. |
| Features and Benefits | The high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range. |
| Features and Benefits | Final assemblies are tested for all critical functions, including response time and airflow at multiple points. |
| Features and Benefits | A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow. |
| Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
| Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
| Features and Benefits | Each unit is guaranteed to function like the original. |
| Features and Benefits | Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance. |
| Housing Color/Finish | Gray/Unfinished |
| Housing Material | Aluminum |
| Package Contents | Electronic Throttle Body, Instruction Sheet |
| Product Condition | Remanufactured |
| Throttle Body Actuation Type | Electric |
| Throttle Body Inlet Shape | Round |
| Throttle Body Outlet Shape | Round |
| Throttle Position Sensor Included | Yes |
WARRANTY TIME: 12 Months
INTERCHANGE:
- GMC: 12580760
- Hummer: 12580760
- Buick: 12572658
- GMC: 12572658
- Isuzu: 12580760
- Saab: 12580760
- Isuzu: 12572658
- Chevrolet: 12572658
- Chevrolet: 12580760
APPLICATIONS:
- 2005-2005 GMC Envoy XUV
- 2007-2008 GMC Yukon XL 1500
- 2008-2008 GMC Savana 3500
- 2008-2008 Hummer H3
- 2007-2008 GMC Sierra 2500 HD
- 2008-2008 Chevrolet W4500 Tiltmaster
- 2008-2008 Chevrolet Express 2500
- 2008-2008 Hummer H2
- 2007-2008 Cadillac Escalade ESV
- 2008-2008 Chevrolet Express 3500
- 2005-2007 Buick Rainier
- 2008-2008 Isuzu NPR-HD
- 2005-2008 GMC Envoy
- 2008-2008 GMC W3500 Forward
- 2007-2008 Chevrolet Suburban 2500
- 2007-2008 GMC Sierra 1500
- 2007-2008 Cadillac Escalade EXT
- 2007-2008 Chevrolet Silverado 3500 HD
- 2007-2008 Chevrolet Tahoe
- 2008-2008 Isuzu NPR
- 2005-2006 Chevrolet Trailblazer EXT
- 2007-2008 GMC Sierra 3500 HD
- 2005-2006 Isuzu Ascender
- 2008-2008 Chevrolet Express 1500
- 2007-2008 Cadillac Escalade
- 2007-2008 GMC Yukon
- 2005-2006 GMC Envoy XL
- 2008-2008 GMC W4500 Forward
- 2007-2008 GMC Yukon XL 2500
- 2007-2008 Chevrolet Avalanche
- 2008-2008 Chevrolet W3500 Tiltmaster
- 2007-2008 Chevrolet Cheyenne
- 2005-2008 Saab 9-7x
- 2007-2008 Chevrolet Suburban 1500
- 2008-2008 GMC Savana 1500
- 2005-2006 Chevrolet SSR
- 2008-2008 GMC Savana 2500
- 2006-2008 Chevrolet Trailblazer
- 2007-2008 Chevrolet Silverado 1500
- 2007-2008 Chevrolet Silverado 2500 HD
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine