Cardone 67-7006 | Fuel Injection Throttle Body
Part Number
67-7006
Special Price $113.24 Regular Price $125.82
---------OR---------
In stock
Estimated Ship Date: 1 Business Day or Less
Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
WARRANTY TIME: 12 Months
BRAND: Cardone Reman
FEATURES:
- Chrysler 300 2010-05, Cirrus 2010-07, Pacifica 2008-07, Sebring 2010-07, Town & Country 2010-08; Dodge Avenger 2010-08, Challenger 2010-09, Charger 2010-06, Grand Caravan 2010-08, Journey 2010-09, Magnum 2008-05, Nitro 2011-07
- Fuel Injection Throttle Body
- Reman. Fuel Injection Throttle Body
- Remanufactured Fuel Injection Throttle Body
- Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
SPECIFICS:
| E-Waste | Yes |
| FAQs | A relearn calibration procedure is necessary after installation of replacement throttle body. |
| FAQs | The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both. |
| FAQs | Is there anything that has to be done after installing the replacement throttle body? |
| FAQs | We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components. |
| FAQs | Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application. |
| FAQs | The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module. |
| FAQs | When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle rpm. |
| FAQs | Is it ok to bypass the coolant hoses? |
| FAQs | What’s an Electronic Throttle body? |
| FAQs | What else does the throttle body control other than idle air bypass and acceleration throughout driving range? |
| FAQs | What do you replace? |
| FAQs | Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response? |
| FAQs | Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points. |
| FAQs | We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function. |
| FAQs | What happens when an Electronic Throttle Body fails? |
| FAQs | The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management. |
| FAQs | Do you sell throttle body spacers? |
| FAQs | No; bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses. |
| FAQs | How do you clean? |
| FAQs | We do not sell Throttle Body spacers nor do we recommend the use of a spacer. |
| FAQs | The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures. |
| FAQs | The OE throttle body has coolant hoses attached. What’s the purpose? |
| FAQs | What causes the Electronic Throttle Body to fail? |
| FAQs | Do all throttle bodies have an ice breaker mode for extreme cold starts? |
| FAQs | Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application. |
| FAQs | How do you test? |
| Features and Benefits | The high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range. |
| Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
| Features and Benefits | Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance. |
| Features and Benefits | A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow. |
| Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
| Features and Benefits | Each unit is guaranteed to function like the original. |
| Features and Benefits | Final assemblies are tested for all critical functions, including response time and airflow at multiple points. |
| Housing Color/Finish | Gray/Unfinished |
| Housing Material | Aluminum |
| Package Contents | Electronic Throttle Body, Instruction Sheet |
| Product Condition | Remanufactured |
| Throttle Body Actuation Type | Electric |
| Throttle Body Inlet Shape | Round |
| Throttle Body Outlet Shape | Round |
| Throttle Position Sensor Included | Yes |
WARRANTY TIME: 12 Months
INTERCHANGE:
- Dodge: 4861691AA
- Dodge: 4591844AC
- Chrysler: 4591844AC
- Chrysler: 4861691AA
APPLICATIONS:
- 2009-2010 Dodge Journey
- 2008-2010 Dodge Avenger
- 2007-2010 Chrysler Cirrus
- 2007-2008 Chrysler Pacifica
- 2005-2010 Chrysler 300
- 2009-2010 Dodge Challenger
- 2007-2010 Chrysler Sebring
- 2007-2011 Dodge Nitro
- 2006-2010 Dodge Charger
- 2005-2008 Dodge Magnum
- 2008-2010 Chrysler Town & Country
- 2008-2010 Dodge Grand Caravan
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine