Part Number
77-7727
$126.99
Out of stock
CARDONEĀ® Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
BRAND: Cardone Reman
FEATURES:
- Buick Regal 1992-88; Chevrolet Corvette 1991-90, Lumina 1993-90; Oldsmobile Cutlass Supreme 1993-88; Pontiac Grand Prix 1993-88
- Engine Control Computer
- Engine Control Module
- Engine Control Computer, ECC, ECM, Engine Control Module, Computer, Module
- Reman. Engine Control Computer
- Remanufactured Engine Control Computer
SPECIFICS:
FAQs | Do all Chrysler Power Train Control Modules (PCM) need vin programming? |
FAQs | Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset? |
FAQs | Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option. |
FAQs | No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application. |
FAQs | Chrysler PCM's identified with a "V" suffix will need to be vin programmed. |
FAQs | Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays. |
FAQs | What steps should I take to assure the original ecm/pcm is causing the issue? |
FAQs | I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)? |
FAQs | The replacement ECM for a Ford vehicle wonāt start the vehicle. Why? |
FAQs | The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number. |
Features and Benefits | On-car vehicle validation is done to test durability and performance. |
Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits | Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life. |
Features and Benefits | Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality. |
Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
DOWNLOADS:
INTERCHANGE:
- Chevrolet: 16198260
- General Motors: 1227727
- General Motors: 16198260
- General Motors: 16197128
- Pontiac: 16198260
- Oldsmobile: 16198260
- Chevrolet: 1227727
- Pontiac: 1227727
- Oldsmobile: 1227727
APPLICATIONS:
- 1988-1992 Buick Regal
- 1988-1993 Oldsmobile Cutlass Supreme
- 1990-1991 Chevrolet Corvette
- 1990-1993 Chevrolet Lumina
- 1988-1993 Pontiac Grand Prix
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine