Cardone 22-311 | Dodge Dakota Rack and Pinion Assembly

Part Number
22-311
Rack and Pinion Assembly

Fits what vehicles: 1987-1990 Dodge Dakota
Special Price $261.27 Regular Price $283.99
Out of stock
Free Shipping

Description


Rack and Pinion Assembly

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONEs Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.


Features


  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.


Specifications


Casting Material:Steel; Aluminum
Distance Between Mounting Holes (in):10.25
Distance Between Mounting Holes (mm):260.35
E-Waste:No
FAQs:For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
FAQs:I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQs:Steering not returning to center coming out of a turn. What could be causing this?
FAQs:The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQs:The rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
FAQs:This symptom is classified as "morning sickness". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
Features and Benefits:100% replacement of rubber sealing components.
Features and Benefits:All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Features and Benefits:Application of specialized lubricant(s) for extended life.
Features and Benefits:As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and Benefits:Finished in protective coating to prevent corrosion and rust.
Features and Benefits:Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:Valve housings have polished micro-finish sleeves for durability (where applicable).
Hose Port Type:O-Ring
Input Shaft Diameter (in):0.73
Input Shaft Diameter (mm):18.42
Input Shaft Length (in):1.75
Input Shaft Length (mm):44.45
Number of Mounting Holes:2
Package Contents:Rack and Pinion, Mounting Bushings Assembly, Sealing Kit, Instruction Sheet
Pressure Port Thread Size:M18 x 1.5
Product Condition:Remanufactured
Rack Length (in):45.50
Rack Length (mm):1155.70
Return Port Thread Size:M16 x 1.5
Steering Rack Color:Black
Thread Length (In):2.50
Thread Length (mm):63.50
Tie Rod Ends Included:Yes
Total Turns Lock To Lock:3.38


Interchange


  • Dodge: 52004762
  • Dodge: 4470181
  • Dodge: 4333081
  • Dodge: 4333981


Fitment


  • 1987-1990 Dodge Dakota


Customer Questions
Does Cardone offer a warranty?
Cardone offers a limited lifetime warranty on most of their automotive parts.
What are the key features of Cardone's manufactured products?
The key features of Cardone's remanufactured products include cost-effectiveness, quality control, and environmental sustainability.
How to choose the right Cardone product?
To choose the right Cardone product for your specific vehicle make and model, it is recommended to use our Year, Make, Model search at the top of the website.
How does Cardone Industries ensure quality?
Cardone ensures the quality and reliability of their remanufactured parts through rigorous testing and inspection processes.
Please, mind that only logged in users can submit questions

Compatible Vehicles

Year
Make
Model
Engine
Copyright © 2013-present PartsHawk, LLC. All rights reserved.