Edelbrock Victor Series 8841 | Engine Water Pump

Edelbrock #8841 Water Pump Ford 5.0L 1965-68 289, 1968-69 351w ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these "super cooling" Water Pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most popular applications, these high performance pumps flow in only one direction for optimum efficiency. The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.

• Water Pump for Small-Block Ford in Satin Finish
• Maximum Cooling for Street and Racing Engines
• Water Pump
• Impeller Is Larger Than Others For Max Pressure
• Internal Passages Are Balanced for Maximum Flow
• { eo : 0in.}
• • Installation is the same as for original equipment water pumps • Consult service manual for specific procedures; if necessary • Remove two screws from backing plate and apply RTV silicone to gasket just before installation • Reassemble backing plate and install on engine using RTV silicone • Be sure that the fan bolts don t protrude through the hub so far that they hit the water pump housing • Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications• The distance from the flange surface to the hub should measure 5.75in.Incorrect alignment or an unbalanced condition puts excessive strain on the pump s shaft and/or bearing and will result in early failure of the shaft and/or bearing. The balance of the assembly depends primarily upon the concentricity of the fan clutch with the pump shaft. Concentricity is not assured when universal type clutches are used. The universal fan clutch has a 3/4in. pilot hole; so an adapter must be used when installing a water pump with a 5/8in. shaft. This adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly; so special care must be taken to maintain concentricity with the shaft and the clutch fan. The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump.
• Victor Series Water Pump
• WATER PUMPS
• Water Pump for Small-Block Ford in Satin Finish
• Ford:Small-Block:289 (4.7L)/302 (5.0L)/351W (5.8L)
• Impeller Vanes Dramatically Increase Flow Rates
• Equal Distribution to Both Sides of Block
• Only Flows In One Direction For Optimum Efficiency
• Edelbrock; Water Pump; Ford; 5.0L; 1986-93; Standard Rotation; Polished; 88414; Black Edelbrock

Satin Finish; Standard Rotation; 5/8 in. Pilot Shaft; 3/4 in. Ball/Ball Bearing; 5.42 in. Block To Hub Height; 1.78 in. InletRight Hand Inlet w/Back Plate






WARRANTY TIME: 12 Months

• 1965-1969 Ford Country Squire
• 1965-1969 Mercury Comet
• 1965-1969 Ford LTD
• 1965-1969 Ford Mustang
• 1969-1969 Ford E-200 Econoline
• 1968-1969 Ford Torino
• 1965-1969 Ford Fairlane
• 1965-1969 Ford Galaxie 500
• 1967-1969 Mercury Cougar
• 1965-1969 Ford Falcon
• 1965-1969 Ford Ranchero
• 1965-1967 Ford Galaxie
• 1965-1969 Ford Ranch Wagon
• 1967-1967 Mercury Commuter
• 1965-1969 Ford Custom 500
• 1966-1967 Mercury Voyager
• 1966-1969 Ford Bronco
• 1965-1967 Mercury Villager
• 1969-1969 Ford E-100 Econoline
• 1965-1965 Ford Falcon Sedan Delivery
• 1965-1969 Ford Custom
• 1965-1969 Ford Country Sedan
• 1969-1969 Ford E-300 Econoline
• 1968-1969 Mercury Montego
• 1969-1969 Ford F-100