Tailpipe Set; Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;

These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit behind the rear tire, similar to the stock tailpipes. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 943048 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.

• Mandrel Bent 16 Gauge Aluminized Tubing
• Exits At Rear Of Vehicle
• Aluminized Steel
• Premium Flowmaster Quality
• 3 Year Limited Warranty

Automotive Item Grade:	High Performance
Color:	Gray
Exit Position:	Dual Rear
Fitment:	Direct OE Replacement
Inlet Diameter:	3.000 in.
Material:	Aluminized Steel
Outlet Diameter:	3.000 in.
Overall Length:	35.000 in.
Position:	N/A
System Type:	Tailpipe
Title:	Flowmaster 15819 Prebent Tailpipes - 3.00 in. Rear Exit - Pair
Tubing Diameter:	3.000 in.
WARNING CA Proposition 65:	No

• 1964-1967 Buick Skylark | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Buick Special | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Chevrolet El Camino | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;Use Offset Inlet/Offset Outlet Mufflers Only
• 1964-1967 Chevrolet Malibu | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;Use Offset Inlet/Offset Outlet Mufflers Only
• 1964-1967 Oldsmobile Vista Cruiser | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Pontiac Grand Prix | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Pontiac GTO | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1965-1967 Buick Gran Sport | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1965-1967 Oldsmobile 442 | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1967 Oldsmobile Cutlass Supreme | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1963-1967 Pontiac Tempest | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Chevrolet Chevelle | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;Use Offset Inlet/Offset Outlet Mufflers Only
• 1964-1967 Oldsmobile Cutlass | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Oldsmobile F85 | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
• 1964-1967 Pontiac LeMans | Note: Dual Rear Exit; 3.0 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required