Premium Molded Heater Hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

• Caution: Do not use for fuel or oil transfer applications
• Engineered to resist electrochemical degradation – the leading cause of hose failure
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed

Branch Quantity:	0
Centerline Length:	21.7
Centerline Length:	551
End 1 Inside Diameter:	.62
End 1 Inside Diameter:	16
End 2 Inside Diameter:	.62
End 2 Inside Diameter:	16
Material:	EPDM
Molded:	Yes
Quick Connect Fitting Quantity:	0

• ACDelco: 18026L
• Carquest: 18711
• Dayco: 87841
• General Motors: 1631560
• Goodyear: 63243
• NAPA Belts/Hose: 10711

• 1985 Cadillac Commercial Chassis | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted
• 1985 Cadillac DeVille | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted
• 1987 Cadillac Commercial Chassis | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted
• 1985 Cadillac Fleetwood | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted
• 1986 Cadillac Commercial Chassis | Position: Pipe-2 To Engine | Note: Available Until Stock Depleted
• 1986 Cadillac DeVille | Position: Pipe-2 To Engine | Note: Available Until Stock Depleted
• 1987 Cadillac DeVille | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted
• 1986 Cadillac Fleetwood | Position: Pipe-2 To Engine | Note: Available Until Stock Depleted
• 1987 Cadillac Fleetwood | Position: Tee-1 To Pipe-2 | Note: Available Until Stock Depleted