Holley 300-255BK | Engine Intake Manifold
Only 2 left
Estimated Ship Date: 1 Business Day or Less
The new single plane intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The carburetor-mounting pad is designed to accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features| like an updated plenum divider area, a 1" shorter height than the 300-25 manifold, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The 300-261 intake manifolds are designed for square-bore carburetor applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.
- Single Plane Intake Manifolds
- Power Band 2500-7000 RPM
- Square Bore Carburetor Mounting Flange
- Single Plane Intake Manifold Kit
- Isolated Water Cross-Over
- Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
- Single Plane Intake Manifold Kit| Carbureted| w/Cathedral Port Cyl. Heads| Front Height/Rear 7.32 in.| RPM Power Band 2500-7000| Black Finish| For Use w/LS1/LS2/LS6|
- Single Plane With Isolated Plenum
|Cylinder Head Type
|WARNING CA Proposition 65
Will an engine flush clean my pistons?
No, an engine flush is unlikely to clean the pistons.
How to replace engine pistons?
Replacing engine pistons involves removing the engine from the vehicle, disassembling it, removing the pistons, inspecting the engine components, installing the new pistons, reassembling the engine, and testing it. It's a complex process that should only be attempted by experienced mechanics.
When do engine pistons rings go bad?
Engine piston rings can go bad due to wear and tear, inadequate lubrication, overheating, manufacturing defects, or improper installation. Symptoms of failing piston rings include reduced engine power, increased oil consumption, and blue smoke from the exhaust. Regular maintenance and inspection can help identify potential issues.
Why do engine piston rings fail?
Engine piston rings can fail due to wear and tear, inadequate lubrication, overheating, manufacturing defects, or improper installation. Regular maintenance and inspection of the engine can help identify potential issues. Symptoms of failing piston rings include reduced engine power, increased oil consumption, and blue smoke from the exhaust.
Can you replace engine pistons rings without removing the engine?
Replacing engine piston rings without removing the engine is possible but not recommended due to the extensive disassembly required and the risk of damaging other engine components. A full rebuild or overhaul is generally more efficient and effective.
Are oil pump gears necessary?
Yes, oil pump gears are essential for maintaining proper engine lubrication in an internal combustion engine.
How do oil pumps work?
Oil pumps work by creating pressure to circulate engine oil throughout an internal combustion engine.
Where is the oil pump located?
The oil pump is typically located inside the engine's lower oil pan or sump.
Why do oil pump failures happen?
Oil pump failures can arise from wear, contamination, poor maintenance, and manufacturing defects, causing inadequate lubrication and potential engine damage.