ICON Vehicle Dynamics 57720P | Toyota Tundra Suspension Shock Absorber Set

Part Number

57720P

07-UP TUNDRA REAR 2.5 VS PB PAIR

$1,000.45

---------OR---------

In stock

Free Shipping

Estimated Ship Date: 1 Business Day or Less

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

ICONs 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON'S Shock Absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) or the Omega Series bypass shocks.

BRAND: ICON Vehicle Dynamics

FEATURES:

Shock Absorber Set
07-UP TUNDRA REAR 2.5 VS PB PAIR
2007-UP TUNDRA REAR 2.5 VS PIGGYBACK SHOCK PAIR
7/8 diameter induction hardened, chrome plated shock shaft
ICONs internal Bump Zone increases damping by 20% to provide more control as the shock approaches full compression
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
07-UP TUNDRA REAR 2.5 PB
Double-sealed Schrader caps reduce risk of damage
07-UP TUNDRA REAR 2.5 VS PB PAIR
6061 aircraft grade aluminum CNC machined components
Nitrogen charged monotube design with piggyback reservoir
PTFE lined spherical bearings and application specific mounting hardware
100% Rebuildable
100% Revalveable
All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICONs Compression Damping Control Valve (CDCV)
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish

SPECIFICS:

Add-On Part	252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
Adjustable	NO
Boot Included	NO
Bore Diameter	2.25
California Proposition 65	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Cylinder Color	Silver
Cylinder Material	Aluminum
Damping Type	Oil
External Reservoir	Yes
Gas Charged	Yes
Grade Type	Performance
Lower Mount Type	EYELET
Mounting Hardware Included	Yes
Shaft Diameter	7/8
Shaft Material	Chrome
Shock Absorber Body End Measuring Point	Shoulder of Stem
Shock Absorber Rod End Measuring Point	CENTER OF EYELET
Title	07-UP TUNDRA REAR 2.5 VS PB PAIR
Tube Outside Diameter	2.50
Upper Mount Type	Stem

DOWNLOADS:

WARRANTY TIME: 1 Months

Product Questions (4)

Customer Questions

How often should shock absorbers be replaced?

Shock absorbers should generally be replaced every 50,000 miles or every 5-7 years

How to replace shock absorbers?

To replace shock absorbers, you need to remove the wheel and tire assembly, unbolt the old shock absorber, replace it with a new one, and tighten the bolts. Then, reinstall the wheel and tire, and test the new shocks.

Why do shock absorbers leak?

Shock absorbers can leak due to worn seals, damage to the piston or cylinder, or corrosion from exposure to moisture and road salt.

Can shock absorbers be replaced?

Yes, shock absorbers can be replaced when they start to wear out or fail.