Standard Grade Universal Catalytic Converter-2.50in.

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Most Versatile Universal Converter
• Fits Up To 80 percent Of All Applications
• Stainless Steel Construction
• Federal Emissions Compliant Designed
• Meets EPA Requirements

Air Tube Adaptable:	Yes
Air Tube Count:	1
Body Height:	3.750 in.
Body Length:	12.000 in.
Body Material:	Stainless Steel
Body Shape:	Oval
Body Type:	Clam Shell
Body Width:	5.500 in.
California Air Resources Board (CARB):	No
Catalytic Converter Air Tube Adapter:	Air Tube Pre-Installed
Catalytic Converter Format:	Pre-Catalytic Converter and Main Catalytic Converter
Converter Body Size:	5.500 in. O.D.
Core Shape:	Oval
Core Substrate Material:	Ceramic
Emission:	Non-California (49-State)
Finish:	Stainless Steel
Heat Shield Attached:	Yes
Heat Shield Included:	Yes
Heat Shield Material:	Aluminized Steel
Inlet Attachment Type:	Weld-On
Inlet Diameter:	2.500 in.
Inlet Inside Diameter:	2.500 in.
Inlet Quantity:	1
Inlet Type:	Weld-On
Main Piping Diameter:	2.500 in.
Material:	Stainless Steel
Outlet Attachment Type:	Weld-On
Outlet Diameter:	2.500 in.
Outlet Outside Diameter:	2.500 in.
Outlet Quantity:	1
Outlet Type:	Weld-On
Overall Length:	16.000 in.
Oxygen Sensor Location:	None
Recommended Use:	Converter
Sensor Port Count:	0
Series:	Standard Grade
Subtitles:	Federal / EPA Compliant
Title:	MagnaFlow Standard Grade Federal / EPA Compliant Universal Catalytic Converter 94016
Type:	Universal
Universal Or Specific Fit:	Universal
WARNING CA Proposition 65:	No

• 1975-1986 Chevrolet C20 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1981 Chevrolet Corvette        Note: Cutting and Welding Required During Installation
• 1975-1981 Chevrolet K20        Note: Cutting and Welding Required During Installation
• 1975-1977 Chevrolet K5 Blazer        Position: Left        Note: Cutting and Welding Required During Installation
• 1975-1977 Chevrolet K5 Blazer        Position: Right        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC C15        Note: Cutting and Welding Required During Installation
• 1975-1976 GMC K15        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC K25        Note: Cutting and Welding Required During Installation
• 1976-1983 Cadillac Seville        Note: Cutting and Welding Required During Installation
• 1976-1978 Chevrolet K5 Blazer        Position: Left        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1976-1977 GMC Jimmy        Position: Right        Note: Cutting and Welding Required During Installation
• 1978 GMC K15        Note: Cutting and Welding Required During Installation
• 1976-1977 GMC K15        Note: Single Exhaust; Cutting and Welding Required During Installation; Single Exhaust
• 1976 GMC K15        Position: Left        Note: Cutting and Welding Required During Installation
• 1976-1977 GMC K15        Position: Left        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1977-1983 Buick Electra        Note: Cutting and Welding Required During Installation
• 1977-1983 Buick LeSabre        Note: Cutting and Welding Required During Installation
• 1977-1983 Buick Riviera        Note: Cutting and Welding Required During Installation
• 1977-1983 Cadillac DeVille        Note: Cutting and Welding Required During Installation
• 1977-1993 Chevrolet Caprice        Note: Cutting and Welding Required During Installation
• 1977-1979 Oldsmobile 98        Note: Cutting and Welding Required During Installation
• 1977-1979 Oldsmobile Delta 88        Note: Cutting and Welding Required During Installation
• 1977-1979 Oldsmobile Toronado        Note: Cutting and Welding Required During Installation
• 1977-1986 Pontiac Bonneville        Note: Cutting and Welding Required During Installation
• 1977-1981 Pontiac Catalina        Note: Cutting and Welding Required During Installation
• 1977-1978 Pontiac Grand Safari        Note: Cutting and Welding Required During Installation
• 1978-1981 Buick Century        Note: Cutting and Welding Required During Installation
• 1978-1983 Buick Regal        Note: Cutting and Welding Required During Installation
• 1978-1987 Chevrolet El Camino        Note: Cutting and Welding Required During Installation
• 1978-1983 Chevrolet Malibu        Note: Cutting and Welding Required During Installation
• 1978-1984 Chevrolet Monte Carlo        Note: Cutting and Welding Required During Installation
• 1978 GMC C25        Note: Cutting and Welding Required During Installation; Converter
• 1978-1987 GMC Caballero        Note: Cutting and Welding Required During Installation
• 1978 GMC G35        Note: Cutting and Welding Required During Installation
• 1978 GMC Jimmy        Position: Left        Note: Dual Exhaust; Cutting and Welding Required During Installation
• 1978 GMC Jimmy        Position: Right        Note: Dual Exhaust; Cutting and Welding Required During Installation
• 1978 GMC K25        Note: Cutting and Welding Required During Installation; Converter
• 1981-1983 Oldsmobile 98        Note: Cutting and Welding Required During Installation
• 1978-1979 Oldsmobile Cutlass Calais        Note: Cutting and Welding Required During Installation
• 1978-1979 Oldsmobile Cutlass Salon        Note: Cutting and Welding Required During Installation
• 1981-1983 Oldsmobile Toronado        Note: Cutting and Welding Required During Installation
• 1978-1979 Pontiac Grand Am        Note: Cutting and Welding Required During Installation
• 1979-1983 Cadillac Eldorado        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC C1500 Suburban        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC C2500        Note: Cutting and Welding Required During Installation
• 1979 GMC C2500        Note: Cutting and Welding Required During Installation; Converter
• 1979-1994 GMC G2500        Note: Cutting and Welding Required During Installation
• 1979-1980 GMC K2500        Note: Cutting and Welding Required During Installation
• 1981-1983 Oldsmobile Cutlass Calais        Note: Cutting and Welding Required During Installation
• 1980-1981 Chevrolet C10        Note: Single Outlet; Cutting and Welding Required During Installation
• 1980-1981 Chevrolet G10        Note: Dual Outlet; Cutting and Welding Required During Installation
• 1980-1981 Chevrolet G10        Note: Single Outlet; Cutting and Welding Required During Installation
• 1980-1981 GMC G1500        Note: Dual Exhaust; Cutting and Welding Required During Installation
• 1980-1981 GMC G1500        Note: Single Exhaust; Cutting and Welding Required During Installation
• 1980 Oldsmobile Cutlass Calais        Note: Air Tube; Cutting and Welding Required During Installation
• 1980 Oldsmobile Cutlass Calais        Note: Cutting and Welding Required During Installation; without Air Tube
• 1980 Oldsmobile Cutlass Salon        Note: Air Tube; Cutting and Welding Required During Installation
• 1980 Oldsmobile Cutlass Salon        Note: Cutting and Welding Required During Installation; Air Tube
• 1980 Oldsmobile Cutlass Salon        Note: Cutting and Welding Required During Installation; without Air Tube
• 1981 Chevrolet G20        Note: Single Outlet; Cutting and Welding Required During Installation
• 1981 Chevrolet K10        Note: Federal Emissions With Dual Outlet; Cutting and Welding Required During Installation
• 1982-1986 Chevrolet K20        Note: Dual Outlet; Cutting and Welding Required During Installation
• 1982-1984 Dodge D250        Note: Cutting and Welding Required During Installation
• 1982-1985 Ford F-150        Position: Rear        Note: Cutting and Welding Required During Installation
• 1992-1994 Pontiac Bonneville        Note: Cutting and Welding Required During Installation
• 1983 Ford E-100 Econoline        Position: Rear        Note: California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation
• 1983 Ford E-150 Econoline        Position: Rear        Note: California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation
• 1983 Ford E-150 Econoline Club Wagon        Position: Rear        Note: California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation
• 1983 Ford E-250 Econoline        Position: Rear        Note: California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation
• 1991-1993 Buick Riviera        Note: Cutting and Welding Required During Installation
• 1984-1985 Ford E-150 Econoline        Position: Rear        Note: Cutting and Welding Required During Installation
• 1992-1994 Buick LeSabre        Note: Cutting and Welding Required During Installation
• 1985-1991 GMC Safari        Note: Cutting and Welding Required During Installation
• 1991-1995 Oldsmobile 98        Note: Cutting and Welding Required During Installation
• 1987-1992 Cadillac Allante        Note: Cutting and Welding Required During Installation
• 1987 Chevrolet Blazer        Note: Cutting and Welding Required During Installation
• 1987 Chevrolet V10        Note: Cutting and Welding Required During Installation
• 1987 GMC R1500        Note: Cutting and Welding Required During Installation
• 1987 GMC R2500        Note: Cutting and Welding Required During Installation
• 1987 GMC V1500        Note: Cutting and Welding Required During Installation
• 1991-1993 Ford Bronco        Position: Rear        Note: Cutting and Welding Required During Installation
• 1990-1992 Cadillac Brougham        Note: Cutting and Welding Required During Installation
• 1991-1994 Buick Park Avenue        Note: Cutting and Welding Required During Installation
• 1991 Buick Reatta        Note: Cutting and Welding Required During Installation
• 1991-1992 Chevrolet Commercial Chassis        Note: Cutting and Welding Required During Installation
• 1992-1993 Chevrolet Caprice        Note: Excluding Police Package; Cutting and Welding Required During Installation; Excluding Police Package
• 1975-1986 Chevrolet C10        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet C10 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet C20        Note: Cutting and Welding Required During Installation
• 1975-1992 Chevrolet Camaro        Note: Cutting and Welding Required During Installation
• 1975-1994 Chevrolet G10        Note: Cutting and Welding Required During Installation
• 1975-1994 Chevrolet G20        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet K10        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet K10 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet K20 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1986 Chevrolet K5 Blazer        Note: Cutting and Welding Required During Installation
• 1975-1979 Chevrolet Nova        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC C15 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC C25        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC G15        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC G25        Note: Cutting and Welding Required During Installation
• 1975-1987 GMC Jimmy        Note: Cutting and Welding Required During Installation
• 1975-1978 GMC K15 Suburban        Note: Cutting and Welding Required During Installation
• 1975-1977 Pontiac Firebird        Note: Cutting and Welding Required During Installation
• 1975-1977 Pontiac Ventura        Note: Cutting and Welding Required During Installation
• 1976-1978 Chevrolet K10        Note: Single Exhaust; Cutting and Welding Required During Installation; Single Exhaust
• 1976-1978 Chevrolet K10        Position: Left        Note: Cutting and Welding Required During Installation
• 1976-1978 Chevrolet K10        Position: Left        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1976-1978 Chevrolet K10        Position: Right        Note: Cutting and Welding Required During Installation
• 1976-1978 Chevrolet K10        Position: Right        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1976-1978 Chevrolet K5 Blazer        Note: SINGLE EXHAUST; Cutting and Welding Required During Installation; Single Exhaust
• 1976-1978 Chevrolet K5 Blazer        Position: Right        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1976-1978 GMC Jimmy        Note: Single Exhaust; Cutting and Welding Required During Installation
• 1976-1977 GMC Jimmy        Position: Left        Note: Cutting and Welding Required During Installation
• 1976 GMC K15        Position: Right        Note: Cutting and Welding Required During Installation
• 1976-1977 GMC K15        Position: Right        Note: DUAL EXHAUST; Cutting and Welding Required During Installation; Dual Exhaust
• 1979-1992 Pontiac Firebird        Note: Cutting and Welding Required During Installation
• 1977-1984 Cadillac Fleetwood        Note: Cutting and Welding Required During Installation
• 1977-1985 Chevrolet Impala        Note: Cutting and Welding Required During Installation
• 1977-1978 GMC K15 Suburban        Note: Single Exhaust; Cutting and Welding Required During Installation
• 1977-1979 Oldsmobile Custom Cruiser        Note: Cutting and Welding Required During Installation
• 1977-1986 Pontiac Parisienne        Note: Cutting and Welding Required During Installation
• 1977-1979 Pontiac Phoenix        Note: Cutting and Welding Required During Installation
• 1986-1993 Cadillac Fleetwood        Note: Cutting and Welding Required During Installation
• 1978-1990 Chevrolet G30        Note: Cutting and Welding Required During Installation
• 1985 Chevrolet K20        Note: Cutting and Welding Required During Installation
• 1978 GMC C25 Suburban        Note: Cutting and Welding Required During Installation
• 1978 GMC K25 Suburban        Note: Cutting and Welding Required During Installation
• 1981-1983 Oldsmobile Custom Cruiser        Note: Cutting and Welding Required During Installation
• 1978-1979 Oldsmobile Cutlass        Note: Cutting and Welding Required During Installation
• 1978-1983 Oldsmobile Cutlass Supreme        Note: Cutting and Welding Required During Installation
• 1981-1983 Oldsmobile Delta 88        Note: Cutting and Welding Required During Installation
• 1978-1983 Pontiac Grand LeMans        Note: Cutting and Welding Required During Installation
• 1978-1987 Pontiac Grand Prix        Note: Cutting and Welding Required During Installation
• 1978-1981 Pontiac LeMans        Note: Cutting and Welding Required During Installation
• 1986-1993 Cadillac DeVille        Note: Cutting and Welding Required During Installation
• 1986-1988 Chevrolet Monte Carlo        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC C1500        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC C2500 Suburban        Note: Cutting and Welding Required During Installation
• 1979-1994 GMC G1500        Note: Cutting and Welding Required During Installation
• 1979-1990 GMC G3500        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC K1500        Note: Cutting and Welding Required During Installation
• 1979-1986 GMC K1500 Suburban        Note: Cutting and Welding Required During Installation
• 1979 GMC K2500        Note: Cutting and Welding Required During Installation; Converter
• 1979-1986 GMC K2500 Suburban        Note: Cutting and Welding Required During Installation
• 1981 Oldsmobile Cutlass        Note: Cutting and Welding Required During Installation
• 1980-1983 Buick Estate Wagon        Note: Cutting and Welding Required During Installation
• 1988-1990 Cadillac Seville        Note: Cutting and Welding Required During Installation
• 1980-1981 Chevrolet C10        Note: Dual Outlet; Cutting and Welding Required During Installation
• 1980 Chevrolet Camaro        Note: Cutting and Welding Required During Installation; Curved Outlet
• 1981-1982 GMC C2500        Note: Cutting and Welding Required During Installation; Converter
• 1981-1982 GMC K2500        Note: Cutting and Welding Required During Installation; Converter
• 1980 Oldsmobile Cutlass        Note: Air Tube; Cutting and Welding Required During Installation
• 1980 Oldsmobile Cutlass        Note: Cutting and Welding Required During Installation; Air Tube
• 1980 Oldsmobile Cutlass        Note: Cutting and Welding Required During Installation; without Air Tube
• 1980 Oldsmobile Cutlass Calais        Note: Cutting and Welding Required During Installation; Air Tube
• 1980 Oldsmobile Cutlass Supreme        Note: Air Tube; Cutting and Welding Required During Installation
• 1980 Pontiac Firebird        Note: Cutting and Welding Required During Installation; Excluding Dual Exhaust
• 1986-1990 Cadillac Eldorado        Note: Cutting and Welding Required During Installation
• 1981 Cadillac Eldorado        Note: Cutting and Welding Required During Installation; Air Tube
• 1981-1982 Checker Marathon        Note: Cutting and Welding Required During Installation
• 1981 Chevrolet Bel Air        Note: Cutting and Welding Required During Installation
• 1981 Chevrolet G20        Note: Dual Outlet; Cutting and Welding Required During Installation
• 1981 Chevrolet K10        Note: California Emissions With Single Outlet; Cutting and Welding Required During Installation
• 1983-1986 GMC K2500        Note: Cutting and Welding Required During Installation
• 1981-1982 Oldsmobile Cutlass Cruiser        Note: Cutting and Welding Required During Installation
• 1982-1986 Chevrolet K20        Note: Single Outlet; Cutting and Welding Required During Installation
• 1982-1987 Dodge D150        Note: Cutting and Welding Required During Installation
• 1982-1987 Dodge D350        Note: Cutting and Welding Required During Installation
• 1982-1985 Ford F-250        Position: Rear        Note: Cutting and Welding Required During Installation
• 1983 Ford E-100 Econoline Club Wagon        Position: Rear        Note: California Emissions Equipped Vehicles Registered Outside Of California; Cutting and Welding Required During Installation
• 1983-1984 Ford Mustang        Position: Rear        Note: Cutting and Welding Required During Installation
• 1983-1984 Mercury Capri        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984-1986 Ford Bronco        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984-1985 Ford E-150 Econoline Club Wagon        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984-1985 Ford E-250 Econoline        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984 Ford E-250 Econoline Club Wagon        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984 Ford E-350 Econoline        Position: Rear        Note: Cutting and Welding Required During Installation
• 1984 Ford E-350 Econoline Club Wagon        Position: Rear        Note: Cutting and Welding Required During Installation