HM Grade Universal Catalytic Converter-3.00in.

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99009HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• 6.2L/6375 lbs. EPA
• Heavy Metal Loaded Catalyst
• Stainless Steel Construction
• Federal Emissions Compliant Designed
• Meets EPA Requirements

Air Tube Adaptable:	No
Body Height:	3.750 in.
Body Length:	12.000 in.
Body Material:	Stainless Steel
Body Shape:	Oval
Body Type:	Clam Shell
Body Width:	5.500 in.
California Air Resources Board (CARB):	No
Catalytic Converter Air Tube Adapter:	Not Air Tube Kit Adaptable
Catalytic Converter Format:	Pre-Catalytic Converter and Main Catalytic Converter
Converter Body Size:	OEM
Core Substrate Material:	Ceramic
Emission:	Non-California (49-State)
Finish:	Stainless Steel
Heat Shield Attached:	Yes
Heat Shield Included:	Yes
Heat Shield Material:	Aluminized Steel
Inlet Attachment Type:	Weld-On
Inlet Diameter:	3.000 in.
Inlet Inside Diameter:	3.000 in.
Inlet Quantity:	1
Inlet Type:	Weld-On
Main Piping Diameter:	3.000 in.
Material:	Stainless Steel
Outlet Attachment Type:	Weld-On
Outlet Diameter:	3.000 in.
Outlet Outside Diameter:	3.000 in.
Outlet Quantity:	1
Outlet Type:	Weld-On
Overall Length:	16.000 in.
Oxygen Sensor Location:	None
Recommended Use:	Converter
Sensor Port Count:	0
Series:	HM Grade
Subtitles:	Federal / EPA Compliant
Title:	MagnaFlow HM Grade Federal / EPA Compliant Universal Catalytic Converter 99009HM
Type:	Universal
Universal Or Specific Fit:	Universal
WARNING CA Proposition 65:	No

• 1996-1999 Cadillac Eldorado | Note: Cutting and Welding Required During Installation
• 1996-1999 Chevrolet Astro | Note: Cutting and Welding Required During Installation
• 1996-1999 Chevrolet C1500 | Note: Cutting and Welding Required During Installation
• 1996-1998 GMC C2500 | Note: Cutting and Welding Required During Installation
• 1997-1999 Ford E-250 Econoline | Note: To 8,500lbs. Gross Vehicle Weight;Cutting and Welding Required During Installation
• 1998 Chevrolet K2500 | Note: Cutting and Welding Required During Installation
• 2000-2005 Chevrolet Astro | Position: Rear | Note: Cutting and Welding Required During Installation
• 2000-2006 Chevrolet Suburban 2500 | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2001-2003 Chevrolet Silverado 1500 HD | Position: Left | Note: with Pre-Converter;Cutting and Welding Required During Installation
• 2001-2003 Chevrolet Silverado 1500 HD | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2001-2002 Chevrolet Silverado 2500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2001-2002 Chevrolet Silverado 2500 HD | Position: Right | Note: Cutting and Welding Required During Installation
• 2001 GMC Jimmy | Note: Federal Emissions Equipped;Cutting and Welding Required During Installation
• 2001-2003 GMC Sierra 1500 HD | Position: Left | Note: with Pre-Converter;Cutting and Welding Required During Installation
• 2001-2002 GMC Sierra 2500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2001-2002 GMC Sierra 2500 HD | Position: Right | Note: Cutting and Welding Required During Installation
• 2001-2003 GMC Sonoma | Position: Rear | Note: Cutting and Welding Required During Installation
• 2003-2006 Chevrolet Express 1500 | Note: Cutting and Welding Required During Installation
• 2005-2006 Chevrolet Silverado 1500 HD | Position: Left | Note: with Pre-Converter;Cutting and Welding Required During Installation
• 2005-2006 Chevrolet Silverado 1500 HD | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2004 Chevrolet Silverado 2500 HD | Position: Right | Note: Cutting and Welding Required During Installation
• 2003-2005 Chevrolet Express 2500 | Position: Front Right | Note: California Emissions Equipped Vehicles Registered Outside Of California;Low Emissions Vehicles (LEV);Cutting and Welding Required During Installation
• 2003-2009 Chevrolet Express 2500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2003-2009 Chevrolet Express 2500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2003-2009 Chevrolet Express 3500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2003-2006 GMC Savana 1500 | Note: Cutting and Welding Required During Installation
• 2003-2005 GMC Savana 2500 | Note: Cutting and Welding Required During Installation
• 2003-2005 GMC Savana 2500 | Position: Front Left | Note: California Emissions Equipped Vehicles Registered Outside Of California;Low Emissions Vehicles (LEV);Cutting and Welding Required During Installation
• 2003-2009 GMC Savana 3500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2006 GMC Sierra 1500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2006 GMC Sierra 1500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2007 Chevrolet Silverado 1500 Classic | Position: Left | Note: Cutting and Welding Required During Installation
• 2007 Chevrolet Silverado 1500 Classic | Position: Right | Note: Cutting and Welding Required During Installation
• 1995-1999 Cadillac DeVille | Note: Cutting and Welding Required During Installation
• 1996-1999 Cadillac Seville | Note: Cutting and Welding Required During Installation
• 1996-1998 Chevrolet C2500 | Note: Cutting and Welding Required During Installation
• 1996-1999 Chevrolet K1500 | Note: Cutting and Welding Required During Installation
• 1996-1999 GMC C1500 | Note: Cutting and Welding Required During Installation
• 1996-1999 GMC K1500 | Note: Cutting and Welding Required During Installation
• 1996-1999 GMC Safari | Note: Cutting and Welding Required During Installation
• 1998 GMC K2500 | Note: Cutting and Welding Required During Installation
• 2000 Chevrolet Blazer | Note: Cutting and Welding Required During Installation
• 2000 Chevrolet Express 1500 | Note: Cutting and Welding Required During Installation
• 2000 Chevrolet S10 | Note: Cutting and Welding Required During Installation
• 2000-2003 Dodge Ram 1500 Van | Note: Cutting and Welding Required During Installation
• 2000-2002 Dodge Ram 2500 Van | Note: Cutting and Welding Required During Installation
• 2000-2002 Dodge Ram 3500 Van | Note: Cutting and Welding Required During Installation
• 2000-2001 GMC Jimmy | Note: California Emissions Equipped Vehicles Registered Outside Of California;Cutting and Welding Required During Installation
• 2000 GMC Jimmy | Note: Cutting and Welding Required During Installation
• 2000-2005 GMC Safari | Position: Rear | Note: Cutting and Welding Required During Installation
• 2000 GMC Sonoma | Note: Cutting and Welding Required During Installation
• 2000-2006 GMC Yukon XL 2500 | Position: Left | Note: with Pre-Converter;Cutting and Welding Required During Installation
• 2000-2006 GMC Yukon XL 2500 | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2001 Chevrolet Blazer | Note: Federal Emissions Equipped;Cutting and Welding Required During Installation
• 2001-2004 Chevrolet S10 | Note: California Emissions Equipped Vehicles Registered Outside Of California;Cutting and Welding Required During Installation
• 2001-2003 Chevrolet S10 | Position: Rear | Note: Cutting and Welding Required During Installation
• 2001-2002 Chevrolet Silverado 2500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2001-2002 Chevrolet Silverado 2500 HD | Position: Left | Note: Cutting and Welding Required During Installation
• 2001-2003 GMC Sierra 1500 HD | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2001-2002 GMC Sierra 2500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2001-2002 GMC Sierra 2500 HD | Position: Left | Note: Cutting and Welding Required During Installation
• 2001-2004 GMC Sonoma | Note: California Emissions Equipped Vehicles Registered Outside Of California;Cutting and Welding Required During Installation
• 2005-2006 GMC Sierra 1500 HD | Position: Left | Note: with Pre-Converter;Cutting and Welding Required During Installation
• 2005-2006 GMC Sierra 1500 HD | Position: Right | Note: Pre-Converter;Cutting and Welding Required During Installation
• 2003-2005 Chevrolet Express 2500 | Note: Cutting and Welding Required During Installation
• 2003-2005 Chevrolet Express 2500 | Position: Front Left | Note: California Emissions Equipped Vehicles Registered Outside Of California;Low Emissions Vehicles (LEV);Cutting and Welding Required During Installation
• 2003-2009 Chevrolet Express 3500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2003-2006 Chevrolet Silverado 1500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2003-2006 Chevrolet Silverado 1500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2003-2005 GMC Savana 2500 | Position: Front Right | Note: California Emissions Equipped Vehicles Registered Outside Of California;Low Emissions Vehicles (LEV);Cutting and Welding Required During Installation
• 2003-2009 GMC Savana 2500 | Position: Left | Note: Cutting and Welding Required During Installation
• 2003-2009 GMC Savana 2500 | Position: Right | Note: Cutting and Welding Required During Installation
• 2003-2009 GMC Savana 3500 | Position: Right | Note: Cutting and Welding Required During Installation