Don't panic! This guide explains every brake warning light meaning (red, yellow, etc.) and what to do. Avoid accidents and expensive fixes. Learn safe driving tips now!
January 1, 2024
FAQ - Answer 3 | Do I have to replace all my brake parts when replacing my brake pads? |
FAQ - Answer 4 | Does ACDelco offer other grades of brake pads? |
FAQ - Answer 5 | Do I have to replace my brake pads after a certain amount of time? |
FAQ - Question 4 | No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc. |
FAQ - Question 5 | Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads. |
FAQ - Question 6 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
FMSI Number | 8225 |
Friction Material Attachment | Bonded |
Friction Material Composition | Ceramic |
Good Maintenance Practices - Section 1 - Bullet 5 | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 1 - Bullet 6 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 7 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 8 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 2 - Bullet 5 | The following should be conducted by a qualified technician: |
Good Maintenance Practices - Section 2 - Bullet 6 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 7 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 8 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 9 | Parking brake adjustments (as needed). |
Grade Type | Regular |
Height (in) | 2.5 |
Length (in) | 9.5 |
Mounting Hardware Included | Yes |
Pad Shims Included | Yes |
Pad Wear Sensor Included | No |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 10 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Weight (lb) | 4.39 |
Width (in) | 6.3 |