ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box.

• Inspected for balance; resulting in smooth brake operation and noise reduction
• Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
• Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration

ABS Tone Ring Included:	No
Bolt Circle Diameter (in):	3.94
Bolt Circle Diameter (mm):	100
Bolt Hole Quantity:	5
Brake Surface Finish:	Turned
Center Bore Diameter (in):	2.17in
Center Bore Diameter (mm):	55mm
Depth:	1.62
Depth:	41.15
Discard Thickness (in):	7.91
Discard Thickness (mm):	201
Grade Type:	Regular
Height (in):	3.62
Length (in):	7.91
Material:	Cast Iron
Maximum Brake Diameter (Discard):	200.91
Mount Hole Diameter (in):	0.593in
Mount Hole Diameter (mm):	15.062mm
Nominal Drum Diameter:	0.312
Nominal Drum Diameter:	7.9
Outer Cooling Fins:	No
Outside Diameter:	0.375
Outside Diameter:	9.55
Programming Required:	No
Stud/Lug Hole Diameter:	0.573
Stud/Lug Hole Diameter:	14.55
Stud/Lug Hole Quantity:	5
Weight:	9
Width (in):	10.88

• 2002-2005 Toyota Celica | Position: Rear
• 2003-2008 Toyota Corolla | Position: Rear
• 2004-2008 Toyota Prius | Position: Rear