ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box.

• Inspected for balance; resulting in smooth brake operation and noise reduction
• Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
• Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration

ABS Tone Ring Included:	No
Bolt Circle Diameter (in):	3.94
Bolt Circle Diameter (mm):	100
Bolt Hole Quantity:	4
Brake Surface Finish:	Turned
Center Bore Diameter (in):	2.41in
Center Bore Diameter (mm):	61.1mm
Depth:	1.8
Depth:	45.7
Discard Thickness (in):	7.91
Discard Thickness (mm):	201
Grade Type:	Regular
Height (in):	3.62
Length (in):	7.91
Material:	Cast Iron
Maximum Brake Diameter (Discard):	200.91
Mount Hole Diameter (in):	0.515in
Mount Hole Diameter (mm):	13.081mm
Nominal Drum Diameter:	0.312
Nominal Drum Diameter:	7.9
Outer Cooling Fins:	No
Outside Diameter:	0.381
Outside Diameter:	9.7
Programming Required:	No
Stud/Lug Hole Diameter:	0.495
Stud/Lug Hole Diameter:	12.55
Stud/Lug Hole Quantity:	4
Weight:	10
Width (in):	11

• 2001-2005 Honda Civic        Position: Rear
• 2009-2013 Honda Fit        Position: Rear
• 2010-2014 Honda Insight        Position: Rear