Part Number
18FR663
Special Price $57.16 Regular Price $67.25
---------OR---------
In stock
Only 1 left
Estimated Ship Date: 1 Business Day or Less
ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them a high quality replacement for many vehicles on the road today. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These friction ready disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
From 3/87
BRAND: ACDelco
FEATURES:
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Developed without attached brake pads for customization
- Ford;Mazda
- Pressure tested to ensure safe and confident braking
SPECIFICS:
Bleeder Thread Diameter | 7/16"-20 |
Caliper Color | Natural |
Caliper Slides Included | No |
Caliper Type | Floating |
Casting Material | Cast Iron |
FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
FAQ - Answer 2 | Yes, ACDelco also offers GM OE disc brake calipers. |
FAQ - Answer 3 | No, but it is a good idea to inspect them at every tire rotation. |
FAQ - Question 1 | Do I have to replace all my brake parts when replacing my disc brake calipers? |
FAQ - Question 2 | Does ACDelco offer other grades of disc brake calipers? |
FAQ - Question 3 | Do I have to replace my disc brake calipers after a certain amount of time? |
Finish | Plain |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Grade Type | Performance |
Height (in) | 6.7 |
Inlet Fitting Type | Female |
Length (in) | 9.5 |
Mounting Bracket Included | No |
Mounting Hardware Included | No |
Pad Wear Sensor Included | No |
Pads Included | No |
Piston 1 Diameter (in) | 2.6 |
Piston 1 Diameter (mm) | 66 |
Piston Quantity | 1 |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Weight (lb) | 8.3 |
Width (in) | 6.7 |
From 3/87
DOWNLOADS:
APPLICATIONS:
- 1994-1994 Mazda B3000 - Position: Front Right
- 1987-1994 Ford Ranger - Position: Front Right
- 1991-1994 Ford Explorer - Position: Front Right
- 1994-1994 Mazda B4000 - Position: Front Right
- 1983-1985 Ford Ranger - Position: Front Right
- 1991-1994 Mazda Navajo - Position: Front Right
- 1987-1997 Ford Aerostar - Position: Front Right
- 1994-1994 Mazda B2300 - Position: Front Right
- 1987-1990 Ford Bronco II - Position: Front Right
- 1984-1985 Ford Bronco II - Position: Front Right
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine