ACDelco 36p0315 Power Steering Pump

Power Steering Pump

Fits: 05-07 Ford Escape, 05-06 Mazda Tribute, 05-07 Mercury Mariner

MPN
36p0315
$118.99
In stock
Only 7 left
Ships on or before the next business day!
ACDelco Professional Remanufactured Power Steering Pumps effectively provide the hydraulic force required for power-assisted steering systems. Each Professional, premium aftermarket pump includes applicable installation instructions, and an installation kit with O-rings and pulley assembly kit when needed. Remanufacturing power steering pumps is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. These power steering pumps will provide the same performance, durability, and service life you expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov


BRAND: ACDelco




FEATURES:


  • All components are closely inspected and validated to meet the strictest quality standards to improve part durability
  • Assembled units are 100% functionally tested for leak-free performance, prior to packaging, to help guarantee unit performance that meets vehicle specifications
  • Cam packs closely are inspected for any wear or imperfections and replaced with new when needed
  • Ford;Mazda;Mercury
  • High-temperature seals are utilized for durability and reliability
  • Housing is cleaned and inspected at multiple stages in the manufacturing process to minimize corrosion and rust prior to component assembly
  • Input shaft seal surfaces are micro-finished for precise fit and leak-free performance
  • Multiple cleaning and washing stations, with regular contamination audits, for every component inside the pump minimize internal contamination and increase part service life
  • Sealing surfaces are polished, restored, and checked for microfinish. This helps ensure maximum sealing to minimize leaks.
  • Seals and O-rings are replaced with new parts for extended life and reliability


SPECIFICS:


FAQ - Answer 1No. It is not necessary to regularly check power steering fluid unless there is a leak suspected in the system or an unusual noise is heard. Fluid loss in this system could indicate a problem, and you should have the system inspected and repaired if you find evidence of a loss. Always reference your vehicle's service information for appropriate maintenance intervals.
FAQ - Answer 2No. You will be able to steer your vehicle if the power steering goes out, but it will require more effort, especially at lower speeds. If your power steering goes out, have the system inspected and repaired as soon as possible.
FAQ - Answer 3Yes. The power steering fluid should be flushed whenever a component is being replaced or the system has become contaminated.
FAQ - Answer 4Yes. Use of the incorrect fluid may damage the vehicle, and the damages may not be covered by the vehicle or component's warranty. Always use the correct fluid listed in the manufacturer's service literature.
FAQ - Question 1Do I need to change my power steering fluid regularly, even if there are no symptoms of problems with the system?
FAQ - Question 2Will I be unable to steer my vehicle if my power steering goes out?
FAQ - Question 3Should my power steering system be flushed every time it undergoes maintenance or component replacement?
FAQ - Question 4Can using the incorrect fluid cause damage to my power steering system?
Good Maintenance Practices - Section 1 - Bullet 1Check power steering fluid levels periodically and add fluid when necessary.
Good Maintenance Practices - Section 1 - Bullet 10Always follow the manufacturer's specific instructions on flushing, but remember the following: always flush out the power steering fluid in the lines before removing the old pump and be ready with two or more quarts of power steering fluid for the flushing process.
Good Maintenance Practices - Section 1 - Bullet 2Have your vehicle inspected if it exhibits any of the following symptoms: unusual noise when turning the steering wheel, a shimmy or shake in the steering wheel, heavy or unresponsive steering at low speeds or during parking lot maneuvers, and/or the steering wheel does not properly return to center.
Good Maintenance Practices - Section 1 - Bullet 3If you live in areas that experience harsh, winter weather, have the entire steering system inspected before winter arrives to help ensure safer driving.
Good Maintenance Practices - Section 1 - Bullet 4It is a good idea to replace O-rings when doing any steering system service. Reusing old O-rings can cause leaks.
Good Maintenance Practices - Section 1 - Bullet 5Always check the specific manufacturer's service information for the correct power steering fluid to use.
Good Maintenance Practices - Section 1 - Bullet 6Keep in mind that fluid color is not an indication of fluid condition.
Good Maintenance Practices - Section 1 - Bullet 7After any service of the power steering system, always bleed the air from the system and verify proper system operation. An accurate fluid level cannot be obtained unless air is bled from the steering system. The air in the fluid may cause pump cavitation noise as well as pump damage over a period of time.
Good Maintenance Practices - Section 1 - Bullet 8The most significant root causes of power steering failures that could lead to pump replacement are system contamination, improper pulley installation, and using the wrong fluid. Following the recommended service procedures during power steering pump replacement address these root causes and help ensure the longevity of the new power steering pump while reducing the chances of premature pump failure.
Good Maintenance Practices - Section 1 - Bullet 9Flushing the system will help eliminate any residual contaminants from causing future pump failure. Dirty or contaminated fluid may cause low or no pressure from the power steering pump, causing the relief valve to stop functioning.
Hose Port TypeBanjo
Inlet Header Length (mm)9.39
Programming RequiredNo
Pulley Attachment TypeSplined
Pulley IncludedNo
Pump TypeVane
Reservoir IncludedNo
Shaft TypeSplined
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Lack of power assist or low assistance

w/o Reservoir


DOWNLOADS:




APPLICATIONS:


  • 2005-2007 Mercury Mariner
  • 2005-2006 Mazda Tribute
  • 2005-2007 Ford Escape
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Compatible Vehicles

Year
Make
Model
Engine
Copyright © 2013-present PartsHawk, LLC. All rights reserved.