Part Number
45A1139
$33.99
Out of stock
ACDelco Professional, premium aftermarket Rack and Pinion Bellow Kits are a high quality replacement for many vehicles on the road today. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Chevrolet;Mazda;Pontiac;Toyota
- Engineered to meet your expectations for fit, form, and function
- Premium, high-quality aftermarket component
- Provides the performance and dependability you expect from ACDelco
SPECIFICS:
Clamps Included | Yes |
Color | Black |
FAQ - Answer 1 | No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system. |
FAQ - Answer 2 | No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs. |
FAQ - Question 1 | Are a CV boot and Rack and Pinion Bellows the same part? |
FAQ - Question 2 | Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure? |
Glue Included | No |
Good Maintenance Practices - Section 1 - Bullet 1 | Inspect or have your bellows inspected for signs of wear. Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system. |
Good Maintenance Practices - Section 1 - Bullet 2 | Inspect your rack and pinion bellows to help detect wear before it becomes a major problem. |
Good Maintenance Practices - Section 1 - Bullet 3 | Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement. |
Grade Type | Regular |
Grease Included | No |
Height (in) | 3 |
Length (in) | 10.7 |
Material | Rubber |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Mounting Hardware Included | Yes |
Programming Required | No |
Rib Quantity | 18 |
Universal Or Specific Fit | Specific |
Weight (lb) | 0.3 |
Width (in) | 3.8 |
DOWNLOADS:
APPLICATIONS:
- 2006-2010 Mazda 5 - Position: N/A
- 2005-2015 Toyota Tacoma - Position: N/A
- 2012-2017 Mazda 5 - Position: N/A
- 2005-2010 Chevrolet Cobalt - Position: N/A
- 2007-2010 Pontiac G5 - Position: N/A
- 2009-2013 Mazda 3 Sport - Position: N/A
- 2004-2013 Mazda 3 - Position: N/A
- 2002-2004 Toyota Avalon - Position: N/A
- 2006-2011 Chevrolet HHR - Position: N/A
- 2005-2009 Chevrolet Equinox - Position: N/A
- 2006-2009 Pontiac Torrent - Position: N/A
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine