ATP Engine Harmonic Balancer

The purpose of an harmonic balancer is to absorb crankshaft vibrations. Harmonic balancers are typically constructed in three pieces. The first piece is often called a hub. It bolts to directly to the crankshaft. The hub is surrounded by rubber or fluid which dampens crankshaft vibrations. The outside layer is metal which has grooves on it for the belt. Over time the rubber and/or fluid layer deteriorate causing the outer pulley to shift forward. This causes belt miss alignment and can ultimately result in crankshaft failure. When the harmonic balancer is broken, it must be replaced. ATP Harmonic Balancers fit and function just like the original part restoring the engine to normal operation.

LineCode:

ATP2

• Venture Products: V1121
• Mitsubishi: MD333325
• Hollander: 30950237
• Qualitee International: 5012076
• Chromite: PC4017
• Chrysler: MN119375
• Dorman - OE Solutions: 594176
• Pioneer Automotive Industries: DA-303
• NAPA: 6005331
• LODI: P-M2972
• Dayco: PB1471-N
• Pioneer Automotive Industries: DA303

• 1997 Chrysler Concorde | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 1997-2004 Mitsubishi Diamante | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 1999-2003 Mitsubishi Galant | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 2001-2005 Dodge Stratus | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 2000-2005 Mitsubishi Eclipse | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 2002-2004 Chrysler Concorde | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in
• 2001-2005 Chrysler Sebring | Note: Groove Qty. 6, 4 Part Type: Double Serpentine Height: 2.09 in Overall Outer Diameter: 6.14 in