ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box.

• Inspected for balance; resulting in smooth brake operation and noise reduction
• Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
• Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration

ABS Tone Ring Included:	No
Bolt Circle Diameter (in):	4.5
Bolt Circle Diameter (mm):	114.3
Bolt Hole Quantity:	4
Brake Surface Finish:	Turned
Center Bore Diameter (in):	2.52in
Center Bore Diameter (mm):	64.1mm
Depth:	1.75
Depth:	44.45
Discard Thickness (in):	8.7
Discard Thickness (mm):	221
Grade Type:	Regular
Height (in):	4.12
Length (in):	8.7
Material:	Cast Iron
Maximum Brake Diameter (Discard):	220.98
Mount Hole Diameter (in):	0.501in
Mount Hole Diameter (mm):	12.725mm
Nominal Drum Diameter:	0.343
Nominal Drum Diameter:	8.7
Outer Cooling Fins:	No
Outside Diameter:	0.416
Outside Diameter:	10.55
Programming Required:	No
Stud/Lug Hole Diameter:	0.493
Stud/Lug Hole Diameter:	12.5
Stud/Lug Hole Quantity:	4
Weight:	13
Width (in):	11.12

• 1990-2002 Honda Accord | Position: Rear