Part Number
506-960
Special Price $139.41 Regular Price $154.90
---------OR---------
In stock
Estimated Ship Date: 1 Business Day or Less
ACDelco GM Original Equipment Suspension Struts are GM-recommended replacements for your vehicle's original components. Suspension struts are similar to standard shock absorbers, but have the added function of maintaining part of the suspension design. They are an integral part of a vehicle's suspension system, providing structural support for the vehicle. These original equipment suspension struts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
BRAND: ACDelco
FEATURES:
- Cadillac;Saab
- GM-recommended replacement part for your GM vehicle's original factory component
- Manufactured to GM OE specification for fit, form, and function
- Offering the quality, reliability, and durability of GM OE
SPECIFICS:
Adjustable | No |
Adjustable Damping | No |
Adjustable Rebound | No |
Body Type | McPherson |
Coil Spring Included | No |
FAQ - Answer 1 | Yes. Although shocks and struts perform a similar function, they vary greatly in their design. The major difference between shocks and struts is that a strut is a structural part of the vehicles suspension system where a shock is not. A strut is also a crucial part of the vehicles steering system and greatly affects alignment angles. |
FAQ - Answer 2 | Yes. You should have your vehicle aligned if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was a previous issue. |
FAQ - Answer 3 | Yes. It is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle. |
FAQ - Question 1 | Is there a difference between a shock and a strut? |
FAQ - Question 2 | Should I have my vehicle aligned after replacing my shocks or struts? |
FAQ - Question 3 | Do I need different shocks for front, rear, left, or right applications? |
Good Maintenance Practices - Section 1 - Bullet 1 | Ball joints and other suspension components |
Good Maintenance Practices - Section 1 - Bullet 2 | Brakes |
Good Maintenance Practices - Section 1 - Bullet 3 | Tires |
Good Maintenance Practices - Section 1 - Header | Your vehicle's struts slowly deteriorate over time, though this wear is normally difficult to detect. Worn struts can also cause additional wear to other vehicle components, so to maximize your vehicle's ride comfort, it is recommended to inspect your vehicle's struts every year. Be sure to always refer to your Vehicle Owner's manual for additional vehicle maintenance practices. Potential affected components may include: |
Good Maintenance Practices - Section 2 - Bullet 1 | Leaking oil or wetness along the body of the shock or strut |
Good Maintenance Practices - Section 2 - Bullet 2 | Broken mounts |
Good Maintenance Practices - Section 2 - Bullet 3 | Broken, damaged, or missing mounting hardware |
Good Maintenance Practices - Section 2 - Bullet 4 | Dented reservoir tube |
Good Maintenance Practices - Section 2 - Bullet 5 | Bent or scratched piston rod |
Good Maintenance Practices - Section 2 - Bullet 6 | Cupped tire wear |
Good Maintenance Practices - Section 2 - Bullet 7 | Damaged spring seat, spring, and spring isolator |
Good Maintenance Practices - Section 2 - Bullet 8 | Damaged strut bearing |
Good Maintenance Practices - Section 2 - Header | To inspect your struts to gauge wear, check for: |
Grade Type | Regular |
Height (in) | 6.4 |
Housing Material | Steel |
Length (in) | 23.7 |
Mounting Hardware Included | No |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Vehicle has 'acceleration squat' |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle does not sit level |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Vehicle steering pulls |
Signs of Wear & Troubleshooting - Section 2 - Bullet 1 | Your ride is harsh, bumpy or shaky |
Signs of Wear & Troubleshooting - Section 2 - Bullet 2 | Your vehicle bounces excessively |
Signs of Wear & Troubleshooting - Section 2 - Bullet 3 | Your vehicle leans or sways while turning |
Signs of Wear & Troubleshooting - Section 2 - Bullet 4 | Your vehicle bottoms out |
Signs of Wear & Troubleshooting - Section 2 - Header | It could be time to replace your struts if, when driving on a surface with bumps and/or dips: |
Signs of Wear & Troubleshooting - Section 3 - Bullet 1 | You notice fluid leakage from your vehicle's struts |
Signs of Wear & Troubleshooting - Section 3 - Bullet 2 | Your vehicle's struts have dented or heavily scratched housings or mounts |
Signs of Wear & Troubleshooting - Section 3 - Header | Uneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include but are not limited to: |
Strut Body End Measuring Point | Top Mounting Bolt Hole Centerline |
Strut Rod End Measuring Point | Rod Shoulder |
Weight (lb) | 12.46 |
Width (in) | 7.5 |
DOWNLOADS:
APPLICATIONS:
- 2011-2016 Cadillac SRX - Position: Front Left
- 2011-2016 Cadillac SRX - Position: Front Right
- SUSP(7AA), SUSP(7AC), SUSP(7AD)
- 2010-2015 Cadillac SRX - Position: Front Right
- 2010-2015 Cadillac SRX - Position: Front Left
- SUSPENSION(6AA), SUSPENSION(6AC), SUSPENSION(6AD)
- 2011-2011 Saab 9-4X - Position: Front Right
- 2011-2011 Saab 9-4X - Position: Front Left
- SUSPENSION(6AA), SUSPENSION(6AC), SUSPENSION(6AD)
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine