How to Change an Oil Filter

How to Change an Oil Filter
August 25, 2023
How to Change an Oil Filter

Changing your car's oil filter is a crucial aspect of routine vehicle maintenance. While it might seem like a daunting task, fear not! In this comprehensive guide, we will walk you through every step, providing detailed information to ensure you can confidently perform an oil filter replacement. Let's dive right in!

Step 1: Gather the Necessary Tools and Supplies

Before you begin, make sure you have all the required tools and materials:


  1. Socket or wrench set: You may need different sizes, so it's best to have a variety on hand.
  2. Oil filter wrench: Useful for removing stubborn filters.
  3. Jack and jack stands: To safely lift and support your vehicle.
  4. Oil drain pan: Ensure it can hold the amount of oil your engine requires.
  5. Safety goggles and gloves: Protect your eyes and hands from oil and debris.
  6. Rags or paper towels: For cleaning up spills and wiping surfaces.


  1. New oil filter: Ensure it's compatible with your vehicle's make and model.
  2. Fresh engine oil: Refer to your owner's manual for the correct type and quantity.
  3. Oil filter gasket: Check if your new filter includes one; if not, purchase separately.
  4. Funnel: To prevent spills while pouring in fresh oil.
  5. Oil filter disposal container: An environmentally responsible choice.

Step 2: Prepare Your Workspace

Safety is paramount. Find a level and well-ventilated area to work in. Here's how to set up your workspace:

Safety Precautions:

  • Park your car on a flat surface: Ensure it's in park (or in gear for manual transmissions) and turned off.
  • Let your engine cool: Hot oil can cause burns, so wait at least 15 minutes after running your vehicle.
  • Wear safety gear: Put on safety goggles and gloves to protect yourself.

Workspace Setup:

  • Pop the hood: Locate the oil filter's position in your engine bay.
  • Position your drain pan: Slide it beneath the oil pan to catch the used oil.

Step 3: Locate, Loosen and Remove the Oil Filter

Where is the engine oil filter located? The oil filter's location varies from car to car. You might find it underneath the engine or in the engine bay. Use your vehicle's manual or online resources to pinpoint its exact location.

Now, it's time to remove the old filter. Here's how:

  • Use the appropriate tool: Depending on the space, you may use a socket, wrench, or oil filter wrench.
  • Turn counterclockwise: With your tool, gently turn the filter counterclockwise to loosen it. Be prepared for some oil to spill into the drain pan as you do this.

Once you've loosened the old filter, remove it by hand. Be cautious, as it will still have some oil in it. Carefully lower it into the drain pan.

Step 4: Install the New Filter

Before installing the new filter, follow these oil change steps:

  • Apply fresh oil: Apply a small amount of new engine oil to the rubber gasket on the top of the new filter. This helps create a proper seal.

Here's how to install the new filter properly:

  • Thread it on: Screw the new filter onto the housing by hand until it's snug.
  • Tighten it further: Use the oil filter wrench if necessary, but be careful not to overtighten. A quarter-turn past snug is usually sufficient.

Step 5: Clean Up and Dispose of the Old Oil

Now that the new filter is in place, it's time to tidy up:

  • Remove the drain pan: Carefully slide it out from under the vehicle.
  • Dispose of old oil responsibly: Take the used oil and filter to an authorized disposal facility, as they need to be recycled or disposed of properly.

Step 6: Add Fresh Oil

The final step is to replenish your engine with fresh oil:

  • Refer to your owner's manual: Find the correct oil type and quantity.
  • Use a funnel: To prevent spills, pour the fresh oil into the engine.
  • Replace the oil cap: Ensure it's securely tightened.
Powered by Amasty Magento 2 Blog Extension
Copyright © 2013-present PartsHawk, LLC. All rights reserved.