Part Number
48-107
Special Price $111.91 Regular Price $124.34
---------OR---------
In stock
Only 1 left
Estimated Ship Date: 1 Business Day or Less
CARDONEĀ® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
WARRANTY TIME: 12 Months
BRAND: Cardone Reman
FEATURES:
- Chevrolet Blazer 2005-95, S10 2004-92, S10 Blazer 1994-92; GMC Jimmy 2005-92, Sonoma 2004-92; Isuzu Hombre 2000-98
- Reman. Transfer Case Motor
- Remanufactured Transfer Case Motor
- Transfer Case Motor
- Transfer Case Motor, Transfer Case, TCM
SPECIFICS:
Component Housing Material | Steel |
Connector/Terminal Configuration | Blade |
E-Waste | Yes |
FAQs | A crescent wrench can be used for this operation. |
FAQs | This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version - there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement. |
FAQs | The replacement motor drive is factory-set in the 2 wheel drive position. |
FAQs | The transfer case must be manually shifted into the 2 wheel drive position before the installation of the replacement motor. |
FAQs | Do not operate motor off the Transfer Case or you will damage the motor and set an error code that must be cleared before the motor will operate. Shift the Transfer Case into the position of the motor to install. |
FAQs | The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition? |
FAQs | What tool can I use to manually shift the transfer case into the two-wheel drive position before I install the replacement motor? |
FAQs | Can I install the replacement motor if my Transfer Case motor failed in 4 Wheel Drive Low or High? |
FAQs | What drivetrain position is the replacement motor drive placed in? |
FAQs | The replacement motor drive is in a different position, can I reposition before installing? |
Features and Benefits | Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance. |
Features and Benefits | Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life. |
Features and Benefits | All motors are 100% torque tested to ensure strength for proper gear engagement. |
Features and Benefits | Motor magnets are 100% recharged for superior performance and reliability. |
Features and Benefits | Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life. |
Package Contents | Transfer Case Motor; Instruction Sheet |
Product Condition | Remanufactured |
WARRANTY TIME: 12 Months
INTERCHANGE:
- Isuzu: 8156366960
APPLICATIONS:
- 1992-2004 GMC Sonoma
- 1998-2000 Isuzu Hombre
- 1992-2004 Chevrolet S10
- 1992-2005 GMC Jimmy
- 1995-2005 Chevrolet Blazer
- 1992-1994 Chevrolet S10 Blazer
Customer Questions
Compatible Vehicles
Year
Make
Model
Engine